answersLogoWhite

0

Resistance =pl/a where a is "area". And area is directly propotional to lenght and thickness. so if the area is greater mean resistance is less. and resistance is inversly proptional to current. so it will act as low resistance path for neutral current.

User Avatar

Wiki User

12y ago

What else can I help you with?

Related Questions

Where on the radio wiring harness of a 2000 Volkswagen Jetta are the ground battery and ignition wires located?

orange is ground, power is red/white Ground is Plug 3, Pin 8 Keyed Power is Plug 3 Pin 4 Battery Power is Plug 3 pin 7


Which blade is the longest in a 3 pin plug?

The ground blade is the longest in a three blade plug.


What is the function of each pin in a 3 pin XLR PLUG?

Pin 1 = ground, Pin 2 = hot/plus, Pin 3 = cold/minus


What pin is the ground on a 3 wire dryer plug?

The ground wire on a 3-wire dryer plug is typically the middle pin on the plug. It is important to ensure that the plug is installed correctly to prevent electric shock and ensure the safe operation of the dryer. If you are unsure, it is recommended to consult a qualified electrician.


Is the UK 3 pin plug used in Eire?

Both use the same kind of 3 pin plug.


How do you connect the 3 pin plug?

One pin for phase other pin for neutral and third one is for earth/ground wire. In India the right pin is for phase, left pin is for neutral and pin on top side is for ground wire. This third top side pin is slightly bigger and longer compared to phase and neutral pins.


Is the hot wire on left or right of 3 pin plug?

In a standard three-pin plug, the hot wire (live wire) is typically connected to the right pin when looking at the plug with the pins facing away from you. The left pin is usually the neutral wire, while the top pin is the earth (ground) wire. However, it's important to check local wiring standards, as they can vary by country.


Why does a 3 pin plug have a clamp on it?

A 3 pin plug has a clamp on it to stop the wires from being ripped out of the plug when people use the wire to remove a plug from the wall instead of gripping the plug and removing it the proper way.


What is the function of a earth terminal in a 3 pin plug?

The earth terminal in a 3-pin plug is designed to provide a path for electrical current to safely flow into the ground in case of a fault, such as a short circuit. This helps protect users from electric shocks and prevent damage to electrical appliances.


Why you use three pin plug insted of two pin?

In an electrical socket, there are three holes. One is a hot wire, one is a neutral wire, and one is a ground wire. Usually, the hot wire is black. The neutral wire is white. And the ground wire is green. Motors usually have three pin plugs. Other items also have them. When a motor has a three pin plug, the body of the motor is attached to the ground. If a spark goes from the electrical wires to the body of the motor, it will go harmlessly to the ground and not hurt anyone. On a two pin plug, usually one pin is larger than the other. The larger pin goes to the neutral or white wire. It is also grounded. That way if there is an electrical short in the device, it should not electrocute the person using it.


What plugs do you use in Singapore?

3 pin plug


Names of 3 pins on 3 pin plug?

Need to know voltage and type of plug to answer this question.