Want this question answered?
Why does the balloon with no water break in the flame? And balloon with water not break? The flame heats the rubber of both balloons. The rubber of the balloon without water becomes so hot, that it becomes too weak to resist the pressure of the air inside the balloon. When water inside the balloon is placed in the flame, the water absorbs most of the heat from the flame. Then, the rubber of the balloon does not become very hot. Because the rubber does not become hot, it does not weaken, and the balloon does not break. Water is a good absorber of heat
it will pop
The water produces hydrostatic pressure
If you filled the bottle with water and then poked the balloon with a pin, I believe it would pierce but not pop it. With the balloon pierced, all you would then have to do is drain the water from the bottle, maneuver the balloon toward its mouth and drain it, and then finish removing the balloon either by fishing or dropping it out of the bottle's mouth.
5 to 6 to 7 minutes
A water balloon is filled with water, and other balloons are filled with air or helium.
I think a water balloon can be tossed if the water balloon is filled lightly. If the water balloon is filled heavily it might break before someone catches it. Also I did this before and I measured it and it was 74 feet and 5 inches exactly!
Why does the balloon with no water break in the flame? And balloon with water not break? The flame heats the rubber of both balloons. The rubber of the balloon without water becomes so hot, that it becomes too weak to resist the pressure of the air inside the balloon. When water inside the balloon is placed in the flame, the water absorbs most of the heat from the flame. Then, the rubber of the balloon does not become very hot. Because the rubber does not become hot, it does not weaken, and the balloon does not break. Water is a good absorber of heat
it will pop
Water is very good at soaking up heat. When the water-filled balloon is heated the water Draws the heat away from the rubber. For the air filled balloon, not so much. The rubber heats up, weakens, and breaks.
A balloon filled with water.
sometimes, depending on how full the water balloon is.
The water has a mass of roughly 560 grams, depending on its purity and temperature. We have no idea what the mass of the balloon is.
If a balloon were completely filled with water, with no extra space, then it will change shape and/or size as the water is frozen. This is because water expands at a rate of 9% when frozen.
skull
The water produces hydrostatic pressure
The balloon pops and the water falls out and splashes onto the floor.