This could be due to the fact that a sodium vapour lamp contains neon gas and when a current is passed through the two electrodes in the lamp the neon gas becomes ionised and shines red until vapourisation occurs and the sodium cause the typical characterised yellow.
A low-pressure sodium vapour lamp such as those used for street lighting contains a small amount of neon/argon gas mixture which gives the initial pinkish-red glow at switch-on. It takes an amount of time for the sodium metal inside the lamp to warm up and vapourise before it will glow with the familiar yellow-orange light.
Yellow Yellow
Bright yellow
sodium gives off an orange to yellow flame colour
sodium vapour lamps produce much higher light output (about 90 lumens/watt) they cannot be used in lighting applications where colour-rendering property is very crucial. This is because most of the light emitted from a sodium vapour lamp is concentrated in the yellow part of the visible spectrum (around 580-590 nm) On the other hand, a mercury vapour lamp is quite suitable for lighting applications. This is because, the mercury vapour lamp can feed almost the entire visible region (380-780 nm) of the human visual system.
sodium is a vomit colour with bits of grass mixed through
In a flame, sodium chloride produces a bright orange-yellow colour.
By the colour of the light that they emit. Sodium vapour lamps produce yellow/orange light while Mercury vapour lamps produce white light.
Sodium vapour.
You get and orange - yellow colour.
Yellow Yellow
Bright yellow :: This is the sodium ions. Any sodium compound will give a flame test colour of yellow/
The color is yellow.
Bright yellow
sodium gives off an orange to yellow flame colour
sodium vapour lamps produce much higher light output (about 90 lumens/watt) they cannot be used in lighting applications where colour-rendering property is very crucial. This is because most of the light emitted from a sodium vapour lamp is concentrated in the yellow part of the visible spectrum (around 580-590 nm) On the other hand, a mercury vapour lamp is quite suitable for lighting applications. This is because, the mercury vapour lamp can feed almost the entire visible region (380-780 nm) of the human visual system.
In a low pressure sodium vapour lamp, argon or neon gas is first heated up to emit a slight red or purple glow. The heat from this warms sodium metal in the light to the point of vaporizing, which is when the familiar yellow glow begins.
Green, Yellow and Orange.