Hi I am not an expert but the answer is complicated and it depends on what you are trying to achieve if you need a magnetic field to operate in high temperatures its one thing, if you need a magnet to loose its strength at a specific temperature its another thing you can ask laboratories to mix materials that attract magnets in different proportions and change the temperature at which they stop working here are the temperatures
I did a science fair experiment on this last year. It is found that magnets that have higher temperature were weaker. to support this claim you should research about the "curie point" which basically says that this is a temperature ( really hot) where the magnet will lose its magnetic properties.
higher the temperature, lower is the magnetic strength..
Yes, it does due to the magnetic force coming from the magnet. After a period of time the magnet that is in lower temperature increases while higher temperatures decrease.
Monel Information from American Special Metals, Corp. www.AmericanSpecialMetals.comAlloying elements other than cobalt and iron in solid solution in nickel lower the Curie temperature. Sufficient copper is present in Monel to lower the Curie temperature so that although Monel is usually slightly magnetic at room temperature, it will become non-magnetic when warmed mildly. When the alloy contains about 1.25% Si, it is non magnetic at room temperature. A Si content of 4% lowers the Curie temperature to approximately -70F. The magnetic properties are not affected greatly by cold work or thermal treatment.
The permanent magnet generator is a synchronous machine where the rotor windings has been replaced with permanent magnets. This eliminates the excitation loses in the rotor, which otherwise typically represent 20-30% of the total generator loses. The reduced losses also give a lower temperature rise in the generator, which means that a smaller and simpler cooling system can be used. The temperature reduction in the rotor also reduces the temperature in the bearings, improving reliability by increasing the lifetime of the bearing and bearing grease.
it is like a magnet to metal and the sun is our magnet to the planets but inertia is the thing that keeps it away from our magnet the sun The farther apart two objects are, the lower the gravitational force between them, so gravity gets weaker with distance. To be specific, it decreases by the square of the distance. So if you double the the distance, the force of gravity is 1/4 as strong. If you triple the distance, the force is 1/9 as strong, and so on.
Jet Stream The main jet streams are located near the tropopause, the transition between the troposphere (where temperature decreases with altitude) and the stratosphere(where temperature increases with altitude)
Removing heat from the air will lower its temperature.
The solution freezes at a lower temperature and boils at a higher temperature.
it is lower temperature when you to mountain,because its cold there
If the ignition temperature of a substance is lower than the room temperature where it is, then that substance ignites.
the temperature of the earth is lower than the Earth.