0
Why does a switch need to be made out of insulators and conductors?
Wiki User
∙ 7y ago
The conductors carry the electricity around the circuit... the insulators make it safe for people to operate the switch without being electrocuted.
Wiki User
∙ 7y ago
Add your answer:
Earn +20 pts
Why is a plug made of conductors and insulators?
Because you need conductors to take electricity to where it is needed. You need insulators to stop it going where it shouldn't.
Why do you need conductors and insulators?
hiya
Why do you need both conductors and insulators in electrical appliances?
To make electricity go where you want it to go, so it will do what you want it to do, you have to provide a pathway along which it can travel, made of conductors, and barriers around that pathway, made of insulators, to keep it from leaking out of the desired pathway.
Are electrical conductors and insulators equally important for electricity?
Yes. You need both conductors and insulators to work with electricity. Conductors such as wires provide a path for electricity to move where it is needed and insulators prevent electricity from dissipating, from being where it is not supposed to be and where it can cause harm and damage.
Why is it important to know which materials are electrical conductors and which are electrical insulators?
We need electricity to be conducted in some cases and insulated in others. For example, wires are made of copper due to its low resistance of electricity, allowing less energy to be used but at the same time passed to an appliance. Wire coverings are made of plastics or rubber to protect us from getting a shock when we touch it even when electricity is conducted in the wire.
Why is a plug made of conductors and insulators?
Because you need conductors to take electricity to where it is needed. You need insulators to stop it going where it shouldn't.
Why do you need conductors and insulators?
hiya
Why do you need both conductors and insulators in electrical appliances?
To make electricity go where you want it to go, so it will do what you want it to do, you have to provide a pathway along which it can travel, made of conductors, and barriers around that pathway, made of insulators, to keep it from leaking out of the desired pathway.
Why do engineers need to know about conductors and insulators?
To avoid or to attract the electricity
Are electrical conductors and insulators equally important for electricity?
Yes. You need both conductors and insulators to work with electricity. Conductors such as wires provide a path for electricity to move where it is needed and insulators prevent electricity from dissipating, from being where it is not supposed to be and where it can cause harm and damage.
What is conductors of insulators?
Heat, electric current, or foreign ideology. Whatever you need to insulate against.
What material is used for the conductor on the high voltage AC overhead cables is it steel or aluminium and Is there an insulator?
High Voltage Overhead cables: Aluminum conductors reinforced with steel (known as ACSR) are primarily used for medium and high voltage lines and may also be used for overhead services to individual customers. Aluminum conductors are used as it has the advantage of better resistivity/weight than copper, as well as being cheaper. Some copper cable is still used, especially at lower voltages and for grounding.To attach the cable to the towers you need to use some type of insulator.Insulators must support the conductors and withstand both the normal operating voltage and surges due to switching and lightning. Insulators are broadly classified as either pin-type, which support the conductor above the structure, or suspension type, where the conductor hangs below the structure. Up to about 33 kV (69 kV in North America) both types are commonly used. At higher voltages only suspension-type insulators are common for overhead conductors. Insulators are usually made of wet-process porcelain or toughened glass, with increasing use of glass-reinforced polymer insulators.
Compare conductor and insulator?
Conductors and insulators are different and simalar in many ways.Two ways they are simallar are they both have electrons and have something to do with electricity.Three ways they are different that conductors let heat and electricity go through it .On the other hand insulators do not let heat or electreicity go through it easily.Another way is conductors transfer eelectrons easily but meanwhile the insulator psses on electrons with difficulty.One last thing is that conductors are not current but insulators are current. HOPE I HELPED YOU
Why is it important to know which materials are electrical conductors and which are electrical insulators?
We need electricity to be conducted in some cases and insulated in others. For example, wires are made of copper due to its low resistance of electricity, allowing less energy to be used but at the same time passed to an appliance. Wire coverings are made of plastics or rubber to protect us from getting a shock when we touch it even when electricity is conducted in the wire.
Conductors around the house?
Places In The Home That Need To Be Conductors To Work
Can you wire a four way switch with two pairs of two wire?
Yes. You have 2 wires (plus ground) coming from the previous switch in the circuit and 2 wires (plus ground) going to the next switch in the circuit. If you have a neutral, or if you have a switch leg, which would be the conductor from the last switch in the circuit to the equipment being powered, you will need 3 or 4 conductors (plus ground).
How are the conductors and insulators in the creation of household electric wire?
Copper is ideally used in wires in the creation of a household electric wire. this is because, copper is a very good conductor of electricity. to avoid anyone from getting shocks the copper wires need to be insulated by an insulating material, ideally plastic that is wrapped around them.
