Want this question answered?
From an Engineering standpoint, it is called a BEARING. In a cheap compass it is a simple PINPOINT in the Base, and a CUP on the bottom of the Needle.
The compass needle is a magnet and as you have probably tried, a magnet will 'stick' to an Iron bar. Thus as you move the compass near the Iron, its magnetic field lines are bent by the Iron and become locally stronger than the field lines of the planet, deflecting the needle away from north.
. The south magnetic pole of the compass points to Earth's north magnetic pole.
Low friction so that weak magnet could move freely.
True... The wire carring current creates a slight magnetic field.
The wire will move due to magnetic forces got from the compass needle since its a good conductor of electricity.
Yes it will show .It is because if electric current is passed through the wires then it will become an electromagnet and show magnetic properties.But there should be a circular coil in the circuit then only that part will show magnetic properties.
From an Engineering standpoint, it is called a BEARING. In a cheap compass it is a simple PINPOINT in the Base, and a CUP on the bottom of the Needle.
It moves because it wants to have compass babies with raccoons and so it won't get high it move and that is it giving birth
The compass needle is a magnet and as you have probably tried, a magnet will 'stick' to an Iron bar. Thus as you move the compass near the Iron, its magnetic field lines are bent by the Iron and become locally stronger than the field lines of the planet, deflecting the needle away from north.
this is because of magnetic field formed when the current flows through it. this is called electromagnetism. if we move the compass needle away from current carrying conductor or wire it returns to its position (north south position)
. The south magnetic pole of the compass points to Earth's north magnetic pole.
You take the wire(s) that are in the circuit and place it on on a compass. Hold the compass still and the needle in the compass will move. However far that the needle is turned will detrmine how much resistance is in the circuit. (You know you have done this correctly if the needle in the compass spins counter clockwise.) Hope this helps you out :)
because light does not have any magnetic push/pull
A compass needle aligns itself with the magnetic field lines and points toward the magnetic north pole. The north-seeking end of the needle is attracted to the Earth's magnetic south pole, causing it to move and orient itself accordingly.
The country was Denmark - the physicist in question was Hans Christian Oersted
He used an electric current to affect the needle of a compass.