mixing strong acids and water generates a lot of heat. if you add a small amount water to a really strong acid, that water will quickly heat to boiling point & vaporize. the quick vaporization of water poured into the acid will cause the acid to blow out of the container and possible onto to you causing acid burns. by adding small amounts of acid to water, the excess water absorbs the heat of mixing and prevents blow out from the container.
When mixing acid and water, always add the acid to the water slowly and carefully. Never add water to acid, as it can cause a dangerous reaction.
To dilute an acid, you can slowly add the acid to water while stirring continuously. Always remember to add acid to water and not water to acid to prevent splattering. Aim for the desired concentration by adjusting the ratio of acid to water.
Always pour acid to water, as the dilution of acid is exothermic reaction.
When adding water to acid, it is important to add the acid to the water slowly while stirring continuously. This helps to prevent the acid from splashing out and causing any potential hazards, such as releasing heat or producing fumes. It's safer to dilute the acid gradually to avoid any violent reactions.
To safely add acid to water, always remember to add acid to water slowly and stir continuously. This helps to prevent splashing and potential hazards, as adding water to acid can cause a violent reaction.
When mixing acid and water, always add the acid to the water, and add it slowly. Never add the water to the acid.
When mixing acid and water, always add the acid to the water slowly and carefully. Never add water to acid, as it can cause a dangerous reaction.
To dilute an acid, you can slowly add the acid to water while stirring continuously. Always remember to add acid to water and not water to acid to prevent splattering. Aim for the desired concentration by adjusting the ratio of acid to water.
Always pour acid to water, as the dilution of acid is exothermic reaction.
When adding water to acid, it is important to add the acid to the water slowly while stirring continuously. This helps to prevent the acid from splashing out and causing any potential hazards, such as releasing heat or producing fumes. It's safer to dilute the acid gradually to avoid any violent reactions.
To safely add acid to water, always remember to add acid to water slowly and stir continuously. This helps to prevent splashing and potential hazards, as adding water to acid can cause a violent reaction.
To prepare a dilute acid solution from a concentrated acid, you can slowly add the concentrated acid to water while stirring. Never add water to concentrated acid as it can cause splattering. Always add acid to water to ensure proper mixing and to prevent violent reactions. Mix well after adding the acid to ensure uniform dilution.
When diluting acid, always add acid to water, not water to acid. This helps prevent splashing and potential hazards due to rapid heat release. Start by slowly pouring the acid into the water while stirring continuously to ensure thorough mixing and prevent a sudden exothermic reaction.
Always add acid to water slowly, while stirring continuously. This helps to control the reaction and prevent splashing or overheating, which can be dangerous. Adding water to acid can cause a sudden release of heat and potentially lead to spattering or boiling.
To safely add acid to water, always remember to pour the acid slowly into the water while stirring continuously. This helps to prevent splashing and reduces the risk of a violent reaction. Never pour water into acid, as this can cause a dangerous reaction.
To dilute sulfuric acid safely, always add the acid to water slowly while stirring constantly. Never add water to the acid as this can cause splattering. Use appropriate protective gear such as gloves, goggles, and a lab coat when handling sulfuric acid.
To safely add water to acid and prevent a dangerous reaction, you should slowly pour the water into the acid while stirring continuously. This helps to dilute the acid gradually and reduce the risk of splashing or a sudden release of heat. It is important to always add acid to water, not the other way around, to avoid a potentially hazardous reaction.