Low oil, low oil pressure, failed oil pressure sensor.
Low oil, low oil pressure, failed oil pressure sensor.
Low oil, low oil pressure, failed oil pressure sensor.
the oil sender unit need to be replace.
The engine light stays on when the engine computer has detected an emissions related failure and set a code.
You need a scan tool to properly reset the check engine light.
Have it checked for codes, That is the same as the check engine light.
A local auto supply store can reset it for you.
You use a scan tool after repairing the failure.
No the Chrysler Sebring did not have that feature until 2008.
The only proper way is with a scan tool.
The 2002 Chrysler Sebring six-cylinder engine oil pressure light alerts the automobile operator when the oil pressure is too low. The oil pressure light will illuminate red.
To reset the oil warning light on a 2008 Chrysler Sebring, turn on the ignition without starting the engine. Slowly push the accelerator down three times. Next, turn the ignition to the lock position and the warning light should be gone.
You can use a scan tool or unhook the battery after repairing the cause of the fault.
Check engine light, rattle noise, low power, change in fuel economy,