Want this question answered?
Its volume decreases from 0° to 4°, and then increases from 4° to 10°.
A decrease in density would indicate a reduction in mass relative to the volume. If the mass decreases but the volume remains the same or increases, then the density would decrease.
When a gas is heated, its' volume increases.
As the pressure increases, the volume wil decrease.
As you decrease the volume, the pressure will increase proportionally, and if you increase the volume, then the pressure will decrease.
No, the volume of a metal increases as it is heated. It expands.
The volume of a substance increases when heated, causing a decrease in density.
the volume of a solid this that humans do to warm up
the volume of the solid would go down , thus making the solid into a liquid.
Its volume decreases from 0° to 4°, and then increases from 4° to 10°.
As gases are heated up, its volume increases, resulting in a decrease of density.
Solid if it's cold, liquid if it's heated.
any increase in temperature will cause gas to occupy a larger volume, any decrease will shrink the volume to a point it becomes liquid. further decrease will cause a solid to form. at -273 degrees celsius everything is solid
A solid or liquid would not change in density because the volume would not change. The density of a gas would increase when cooled and decrease when heated provided the volume is allowed to change as a function of temperature. However, density of a gas is generally not measured because it is not a useful metric to use.* * * * *That is a rubbish answer.Almost all solids or liquids expand when heated. (Pure water under "normal" circumstances has an anomalous phase between 0 and 4 deg C). So heating will increase the volume thereby decrease the density.
Because the pressure that is inflated on the gas which is highly inflammable multiplies on the volume of the gas.
The temperature decrease and also the volume.
A decrease in density would indicate a reduction in mass relative to the volume. If the mass decreases but the volume remains the same or increases, then the density would decrease.