It could be a mixture of a couple of things. First could be an intake leak, or a vacuum hose leak. To check for these, get a can of Carb and Choke cleaner, and spray the vacuum lines as well as the intake system. If the motor revs up while you spray the lines, you would have a leak. The other reason for this could be a carborator issue. I recommend removing the carb, cleaning all ports and jets out with carb cleaner, and if mechanically inclined enough, do a full rebuild on the carb. Hope this helps.
1423
i have a 93 p/u and kraigen said .032
it is passenger side below the intake mounted in fuel line by the frame
To set the timing on a Toyota 22R engine find the distributor. The engine will have marks at which the distributor can be set. The OEM setting for a 22R engine is 5 degrees.
To replace the injectors in 86 Toyota truck 22r, simply refer to your user and service manual.
Because it has Toyota stamped on it.
A 1994 Toyota 22r 4 cylinder has 116 horsepower. Prior to this, the horsepower was between 100 and 108 for other Toyota engines.
The 1984 Toyota 22R engine diagram can be obtained from most Toyota dealerships. The engine diagram can also be found at most auto-parts stores.
yes but you need a cyl tranny motor mounts and engine harness. this is not a small job and requiers a lot of cuting and welding
10w30
Yes. In most models, if not all, the 22r came stock in them.
You can get a diagram for a 1983 Toyota truck 22R engine at various auto part stores. You can also check in the owner's manual.