If you are referring to the blower motor only working on the high speed setting, then the problem is the blower motor Resistor Pack is defective. Replace it. It can be the blower motor speed control switch but not likely.
the 1999 wrangler's heat only worked on high,but now it don't work at all.
a bad blower motor resistor heat normally used on medium and high medium usually burns out those speeds first till only high is left normally located right back under glove box on heater box/core line usually 20-40$
not offered until new body style in 2000 and only some models
get an oil wrench with a handle that piviots.the only way.dont forget to lube the ring on filter.
The only community in the Yukon territory
Heat transfer will only occur if there is a difference in temperatures. So if an object is high temperature but the surrounding area is also high temperature there will be no heat transfer.
Camry 1999 has only on bulb for both low and high beams.
Yukon's Mount Logan is 5,959 metres (19,551 feet) high, making it the highest mountain in Canada and second only to Alaska's Mount McKinley in all of North America.
why would get only little heat out of heater on a 1999 S-10 with 4.3 c.i.engine . the antifreeze is full in the radiator.
Fuel level, heat or air conditioning up, both high and low, high only, floor only. Center vents are for air conditioning output only, no heat. Heat is designed to blow out side and floor vents only. NOT center. Center is only for air conditioning or summer vents.
Does the engine heat up fully?
Because it was the only city in Yukon with a stable and growing population.