Want this question answered?
I have a 917.28926 and my manual states: With engine off and parking brake set disengage transmission by placing freewheel control in disengaged position. Sitting in the tractor seat, start engine. After the engine is running, move throttle control to slow position. With motion control lever in neutral position, slowly disengage clutch/brake pedal. Move motion control lever to full forward position and hold for 5 seconds. Move lever to full reverse position and hold for 5 seconds. Repeat this procedure 3 times. Move motion control lever to neutral position. Shutoff engine and set parking brake. Engage transmission by placing freewheel control in engaged position. Sitting in the tractor seat, start engine. After the engine is running, move throttle control to half speed. With motion control lever in neutral position, slowly disengage clutch/brake pedal. Slowly move motion control lever forward. After the tractor moves approximately 5 feet, slowly move motion control lever to reverse position. After the tractor moves approximately 5 feet, return the motion control lever to the neutral position. Repeat this procedure with motion control lever 3 times. Your transmission is now purged and ready for normal operation.
bad ballast resister
you can get a gas tank off of eBay or junkyard or some auto website.
neutral
something that you put on the back off a tractor to plow the fields. by flame 64.
You cannot put a vehicle in neutral when the motor is turned off. You can put the vehicle in neutral while the motor is running. Then you can turn the vehicle off and the vehicle will remain neutral.
yes,it is safe to put off road diesel fuel not only in tractor but also in other vehicles
You would need to take the shift cable off at the transmission and move the lever manually.
Write down the serial number off the seial number plate usually on the back of the tractor and go to your john deere dealer who can easily tell you the year of your tractor.
Depends, what did he do to you?
Neutral must never be cut off.
Hello, I need to know the tractor model number and deck size to answer your question..