Why Fuses "Keep Blowing" Fuses and Circuit Breakers are safety devices designed and installed in electrical circuits TO PROTECT the conductors [wires] from short circuits and overload conditions which can cause extreme overheating which can result in damage to the conductors, and worse the possibility of a FIRE which could destroy the vehicle. When a fuse [and replacement fuses] repeatedly blow, is an indicator of an UNSAFE CONDITION in that circuit, usually a short. Do not install a larger fuse in a misguided attempt to correct the problem. To install a larger fuse would invite damage to the wiring and an electrical system fire. The proper "fix" is for a qualified technician, who knows what he/she's doing, to troubleshoot the circuit, find and identify the defect, and make proper repair [s], BEFORE replacing the fuse again [with a properly sized fuse].
Find out why the fuse is blowing. You have a short or the circuit is overloaded.
There is an electrical short to ground in the fan switch or in the blower motor itself.
could be that the regulator in the alternate is failing and causing power surges in the electronics and the fuses are blowing to prevent damage to the device and vehicles wiring.
There is a short somewhere.
for fuse to keep blowing, there is a short in the eletrical system somewhere. check the a/c switch and the a/c clutch
Your ground or power can be hooked up wrong....or the fuses might not be big enough...mine was having the same problem!
If your wipers keep blowing the fuses on your 1998 Nissan Altima, it could be a short or the wrong fuse being used. You may have a short in the wiring or the wiper switch, a bad ground wire, or loose wiring.
You evidently have something shorted to ground. You did not specify as to which fuse you are blowing. Consequently, iI am unable to help you.
If fuses keep blowing on your Honda, you likely have a short somewhere. You can get a multimeter and a copy of the wiring diagram so you can track down the short, or you can have a mechanic do it. If you've recently installed anything new such as a radio or a gauge or switch, that would be where you want to start.
you have a short somewhere on that circuit. you need to find it and repair it.
you have a wire that may be coroded and grounding out on the frane somewhere
the power suppy diode are probably shorted.