0
What else can I help you with?
What is the length of a pencil case?
Well, isn't that a lovely question! The length of a pencil case can vary depending on the brand and design, but most standard pencil cases are around 8 to 9 inches long. Remember, it's not about the length of the pencil case, but how it holds your creativity inside that truly matters.
What is slip fit in plumbing?
'Slip fit' is a term used where a pipe or fitting easily slips inside the 'neck' of another associated piece. Some kind of glue is always used in 'slip fit' parts.
Can a 16 cm long pencil and a 150 mm long pencil fit into a pencil case that is 150 mm long?
Not if all the pencils have to lie straight and neat and parallel, because 16 cm is 1 cm longer than 150 mm.But if the pencil case is more than 5.6 cm wide, then the diagonal is more than 16 cm,and the 16 cm long pencil can lie in it diagonally.
Is pencil case is shell or frame structure?
A pencil case can be considered a shell structure if it has a continuous outer surface that provides support and shape, typically seen in hard-shell cases. However, if the pencil case has a frame that supports a flexible material, like fabric, it can be classified as a frame structure. Most common pencil cases are soft and flexible, leaning towards being shell structures, while some hard cases may fit into the frame category.
How many kittens can you fit inside an average sized pillow case?
About 94 if they is big enough
How do you make a BBS?
How to make a BB gun using a pen get a pen...take everything off of/ inside of the pen...get the case of it (the body) get a mechanical pencil...take the plunger out (the thing holding the eraser) NOTE: the pencil MUST be the kind with the plunger running all the way down the body on the inside put the plunger in the pen body (it should be able to slide in and out with NO problem) get 1-4 rubber bands, cut them so that they make a C shape (one cut) put all of them together so that they fit together...put the middle of the mass on top of the pencil plunger...stretch the rubber band cluster towards the bottom of the pen body...use glue or something to attatch the cluster there...wait for it to dry...then, pull back on the plunger, put a BB in the body, aim, and release the plunger...there you go, it shot... these can be modified
How much does a full pencil case weigh in kilograms?
i am sure it is 1 kilogram
How do I fit PVC cap and plug together?
with PVC glue
Is the length of a pencil greater or less than a meter?
Oh, dude, a pencil is definitely less than a meter long. I mean, unless you have some giant novelty pencil or something. But your average, run-of-the-mill pencil? Yeah, definitely shorter than a meter. Like, imagine trying to fit a meter-long pencil in your pencil case. That would be a sight to see.
What must the power supply have that is the same as the case in order to physically fit inside the case?
The power supply must have compatible dimensions and mounting points that align with the case's design to physically fit inside. Additionally, it should have the same form factor, such as ATX or SFX, to ensure proper installation and secure attachment. Proper cable management options should also be considered for optimal airflow and organization within the case.
Will an 1989 jeep Cherokee column fit in a 1995 wrangler?
Yes but u need to use a strong glue to glue it in. - chuck
Does a xfx radeon hd 4870 x2 2gb pcie fit in a antec nine hundred two chassi?
Yes it does, i have one inside my antec 902 case, but its a tight fit.
