My Yukon had the same problem. At first i thought it was the lifter, but i replaced those and it still kept clicking. I was looking into my engine one day and noticed there was a high heat bolt missing from a hole in my exhaust manifold. I replaced it with another high heat bolt and it stopped making the clicking noise. If you dont replace the bolt, the noise should stop after your engine gets hot and the metal starts to expand. Hope this helps!
Sounds like your drive shafts need replacing.
Sounds like a wheel bearing to me.
that's called a turn signal
make noise when turn any side
A car with a flat (dead) battery usually sounds dead - as in no sound. If you turn the key, trying to turn the engine on, chances are it will make no sound at all, or may make a sort of 'clicking' sound, or possibly a faint intermittent sound.
When the battery does not have enough voltage to turn the starter over it will sometimes make a clicking noise.
Turn it on
http://www.grandamgt.com/forum/showthread.php?t=50126
it sounds like a bad flasher which is directly behind the switch/button that is used to turn four ways on
A knocking/clicking noise when making a turn is a sign of a torn CV boot. In this case it's the driver side boot that is torn.
In Subaru Car. Make clicking noises when work.
A clicking sound either when you are driving or when you make a turn. The Clicking sound will come from the outside wheel during turns, such as if you turn left the right cv will generally make the noise.