Want this question answered?
A breaker will keep tripping until the fault that caused it to trip is corrected. That's what it is designed to do. There's either a circuit overload or a short circuit. How fast the breaker trips can indicate how overloaded it is. If you are very close to the rating of the breaker you can actually trip it over time. If you are definitely over the breaker will usually trip instantly. If there is a short circuit you can usually tell that by how violently the breaker trips. If you have conduit you can hear the wires banging around in the pipe. A frequently tripping breaker may also be faulty and need to be replaced - breakers are designed to fail by tripping prematurely rather than by not tripping at all, as this is much safer. This is very often the case for breakers that trip at seemingly random intervals, often when very little load is being drawn.
If the breaker trips when nothing is turned on it could be a mouse problem. If it only trips when certain lights or appliances are turned on one of them is probably the reason.If it trips when nothing is being turned on or off something is getting hot. You should then have qualified electrician look at it. Hope this is usefull.
The 59 relay is an overvoltage relay. The 59N relay is an overvoltage relay for the neutral circuit. Check neutral and make sure the system is properly balanced.
A power strip normally has a built in breaker, so this is not a bad idea. Keep in mind though, you won't want to take the chance of tripping the breaker if you have a computer plugged into the strip. In this case, plugging directly in the wall would be recommended.
Does it run for a brief period then shut off? Could be a capacitor getting ready to fail. Could be getting hot. Is it tripping the circuit breaker?
The most likely possibility is the refrigerator has a problem and needs to be fixed. Another possibility is the refrigerator is on a circuit that does not have enough current capacity to operate it and other appliances that are on the same circuit.
Outside breaker distribution panels must be rated for outdoor use and are already weather proof. If this is not the case then a protective covering must be made around the panel to keep the weather elements away from the box. If either of these options are used then the distribution box does not have to be caulked.
Earth leakage or problem with the switching when the condenser clicks on is often the problem. This often causes an electric 'arc' which grounds to Earth, causing the breaker to switch. It often happens when fridges & freezers get ol
you cant but there is a glitch if you keep trying to get in the elevater you will pop in
If the switch is mounted securely and it keeps tripping during normal driving conditions I would suspect the switch is bad.
you have a short to ground in the electrical circuit that that breaker is on.
If you are referring to circuit breakers used in residential or commercial building electrical systems, the answer is - you can't! What's more, you don't want to!Circuit breakers are a safety device. A 14 gauge wire can safely handle 15 amps. If there is a short circuit, or if an appliance or appliances are plugged in that uses more than 15 Amps, the wires would overheat and could start a fire. The circuit breaker trips to prevent this.The idea when a breaker trips is for you, the intelligent human, to go and look for the overload, and fix it before resetting the breaker. A mindless self-resetting breaker would just keep heating up the wire until a fire starts, defeating the purpose.If you have a breaker that continuously trips, don't just keep resetting it. Find out why it is tripping and fix it or have it fixed! This could save your life!