0
Why does your riding mower stall when you engage the mower blade?
Wiki User
∙ 16y ago
throtle setting not high enough, bad spark plug,
Something else to check
Newer mowers come with a safety interlock system that prevents mower engagement when no operator is on the seat or when the parking brake is engaged. Check your seat switch by junping across the terminals, if the blades start then the seat switch is bad.
Wiki User
∙ 16y ago
Wiki User
∙ 14y agoLook underneath the deck where the pto is. There are two wires coming from it. Make sure they haven't disconnected, check that those wires are in good condition also. And if all that seems good it may be your switch.
Add your answer:
Earn +20 pts
Why does torro riding mower stall when put into gear?
This is usually caused by a faulty seat safety switch.
What does a stall convertor do?
a stall will not engage trans until a minimum rpm is reach depending on rpm range of the stall converter
Why does your Huskee riding mower stalls after engaging blades?
The seat safety switch is not working properly correctly. If the safety does not sense that there is anyone on the seat then it will shut down the mower. This keeps the mower from running over someone if they would happen to fall off while mowing. Or if the safety is working you may have bad bearings on your deck and that will also stall your motor, or something jammed in the blades.
Why does your weed eater lawn mower stall right away?
My weed eater lawn mower was expose to the wet weather and now it not staying on
What is the phenomenon called that limits a helicopter's maximum speed?
Retreating blade stall.
Stall control wind turbine?
Stall control when related to wind turbines is actually the angle of the turbine blade. This angle is adjusted with the direction and speed of the wind.Ê
Why does your edger stall when you engage the blade to edge?
The engine can't handle the extra load. Check the spark plug, fuel filter and air filter. If all is okay, open the carburetor needle valve (rotate counter-clockwise) 1/8 turn for a slightly richer mixture.
Why would a Briggs and stratton lawn mower engine stall when the pto is engaged?
Typically this is caused by a bad seat safety switch.
Why does myTroy Bilt lawnmower stall when the blade is lowered?
There are two things that could cause this. The first and most popular problem is that the safety switch for the seat is not working correctly. It determines whether someone is on the seat. If for some reason the driver should fall off of the mower while mowing it will shut the mower off. It is a good feature but it causes the problem you are talking about when it fails. The other thing it could be is a problem in the deck. One of the spindle could be seizing and keeping the deck belt from turning. That would bog down the engine and make it stall. This is rarely the problem. You can rule this out by taking off the deck belt and starting the mower, lowering the deck and see if it still shuts off. If it doesn't then this is the problem.
What are the limitations of the maximum forward speed of a helicopter?
Helicopter blades act in the same way as the wings of an airplane. They generate lift with the air flowing faster on the top of the airfoil then on the bottom. When you reach a certain speed, depending on blade specifications and limits, the air flowing over the blades become equal on the top and bottom of the airfoil. This is what is known as blade stall. The blades no longer generate lift. The same effect in fixed wing aircraft is known as a speed stall. This concept also takes place when a helicopter flies too high. As the air thins with altitude eventually there is not enough air for the blade to "bite". Thus blade stall again.
How do you change your riding horse on horseland?
Go to the horses you want to ride's stall and there should be a ride in the world button under its picture!
Why does your lawn mower stall after 5 minutes of running even after you replaced the spark plug?
Check the gas tank for water at the bottom of the tank. That is a common problem.
