The hose has to be at least at the top of the washer.
Draining refers to water falling due to gravity so you can't technically drain a washing machine to an overhead drain. However, washing machines don't really drain. The water is pumped out and up and can therefore be discharged to a drain that is slightly higher than the washing machine itself
......before, but I would not recommend direct drain. The washing machine hose must extend up above the flood rim of the washing machine before entering the drain. If not, there is a possibility of sewage backing up into your washing machine.
None, but you could install a transfer pump to the drain hose of one.
Your washing machine drain may be backing up due to a clog in the drain pipe or a malfunction in the machine's internal components. To fix it, you can try using a drain snake or a plunger to clear the clog. If that doesn't work, you may need to call a plumber to inspect and repair the drain line.
The proper height for a washing machine drain standpipe is typically around 36 inches above the floor. This allows for proper drainage and prevents water from backing up into the machine.
When the washing machine drains, it can cause the toilet to overflow because both appliances may share the same drain line. If the drain line becomes clogged or blocked, the water from the washing machine can back up into the toilet, leading to an overflow.
what would be needed to drain a washing machine up from a basement? We have power and water, as the water heater is in the basement, but the drains are about five feet up.
Either have the washing machines pump it up Or use a sump designed to handle washing machine waste lint, volume etc
The drain is getting plugged and the toilet is lower than the washing machine drain so it is easier for the water to come up in the toilet than to go straight out the drain. Put some drain cleaner down the drain where the washing machine drains and that may solve the problem.
To properly hook up a washing machine drain hose, first locate the drain outlet on the back of the washing machine. Connect one end of the drain hose to this outlet securely. Next, find the drain pipe in your laundry room or utility area. Insert the other end of the drain hose into the drain pipe, making sure it is secured in place. Ensure that the hose is not kinked or twisted, as this can cause drainage issues. Finally, test the connection by running a small load of laundry to check for any leaks or drainage problems.
A solenoid valve in a washing machine controls the flow of water into the machine. When the washing machine needs water to fill up or drain, the solenoid valve opens or closes to regulate the water flow. This helps the washing machine operate efficiently and effectively by ensuring the right amount of water is used during each cycle.
The purpose of the washing machine p trap is to prevent sewer gases from entering the washing machine and the home. It also helps to maintain proper drainage by creating a water seal that prevents odors and gases from coming back up the drain. This contributes to the overall functionality of the washing machine by ensuring that it operates efficiently and safely.