Asked in Toyota 4Runner
The brake warning light wont go off on your 1990 Toyota 4runner?
The brake light is controlled by a relay switch. If the relay switch is bad the brake lights will stay on. The brake light switch simply plugs in and out. Unplug the brake light switch until you can replace it. ...
Asked in Toyota 4Runner
How do you Change Brake Rotors on a 1990 Toyota 4runner 4wd?
When changing the brake rotors on a 1990 Toyota 4runner the vehicle must be safely raised and propped up. The calipers must be loosen and rotors will be able to be removed. The process must be repeated for all four wheels. ...
Why would the tail lights work on a 1990 jeep Cherokee but the brake lights don't work?
check the fuse for the brake lights, they have thier own. also check the brake light switch at the at the top of the brake petal ...
Asked in Auto Parts and Repairs, Headlights Tail and Brake Lights, Ford Explorer Sport Trac, Ford Explorer XLS
Why would a 1990 Honda Civic running lights go out when the brake lights come on?
The running lights have a bad ground.
Where is the horn located on a 1990 Toyota 4runner?
The horn is located behind the grill just beside the left and right head lights.. ...
Tail lights on my 1990 ford ranger don't work but brake and turning lights do?
burnt fuse ... tail lights are on a different circuit than stop or turn lights ...
Asked in Auto Parts and Repairs, Headlights Tail and Brake Lights, Ford Ranger, Ford Expedition Eddie Bauer
1990 ford ranger brake lights wont work we checked fuses bulbs and changed brake switch any other ideas?
check that you have double filament bulbs in tail lights
Why would the brake lights on your 1994 Corvette not function except the center high one which works fine?
Answer Try checking your fuse for your tail lights in your fuse box if that doesnt work try check for a short in your wiring Answer I noticed on my 1990 did the same. Also found out it only happens when the TILT wheel is completely down. Try lifting the tilt wheel up and down with someone watching your brake lights. Have not pinned down the source in the column yet, but will keep looking!!! The brake light switch is probably the problem. My...
Why is my Brake lights not turning off on 1990 GMC Sierra?
Brake Lights that Will Not Turn Off Although it's possible there could be other reasons, the most common causes for brake lights to stay on continuously include: The brake light [if mounting position is adjustable] is out of adjustment, or The brake light switch contacts are fused ["welded"/melted] together, or The brake light switch is otherwise defective. ...
Asked in Oldsmobile Ninety-Eight
On a 1990 olds 98 the problem is no brake lights or taillights i do have headlights and turn signals thanks?
If you have no brake lights or tail lights then you've probably got an electrical problem. Check the fuses first and see if you have one or more blown. ...
Asked in Auto Parts and Repairs, Headlights Tail and Brake Lights, Jeep Grand Cherokee Limited, Ford Explorer XLS
How do you make your 1990 jeep wrangler brake lights work even after replacing the brake light switch?
Your fuse could be blown, or the brake light switch is improperly adjusted. ...
You have replaced the brake switch on your 1990 Chevy 1500 all fuses and both bulbs are good but you still have no brake lights at all anyone have any ideas?
check wire continuity- no power no lights
Asked in Toyota 4Runner
Where do connect trailer wiring on 1990 Toyota 4Runner?
i dont know if your model of 4runner has this or not, but on my 1990 4runner 4DR 4WD 3.0L V6, there are 4 wires coming from a white box under the rear bumper on the drivers side. coming from the box is also a few wires that go to the right side brake light asembly. the set of 4 wires that do not connect to the brake lights, is your trailer brake wires that conect to a simple 4...
Asked in Headlights Tail and Brake Lights, Jeep Grand Cherokee Limited, Toyota Camry, Ford Explorer XLS
Why would the tail lights work on a 1990 Camry but the brakes lights will not even after you replaced the bulbs and the fuse to the brakes?
Check the switch at the brake pedal .
Asked in Auto Parts and Repairs, Headlights Tail and Brake Lights, Dashboard Lights and Gauges, BMW 3-Series
1990 325i cabriolet- brake light warning comes on all the time but lights check ok?
fault brake light switch, located at the top of the brake pedal.
Where are all the brake light grounds on 1990 sundance when the headlights are off then brake lights are fine but when u turn headlights on then the brake lights don't work except the cyclops lights.?
You probably have a loose wire connection in the brake light sockets. Insert a nail or probe tip into the back of the light socket where the wires are inserted and test the brake lights. (The socket can appear perfectly normal and the wires may even seem well attached.) ...
If the brake lights are out in a 1990 Honda Civic LX and the bulbs are new what do you do next?
check fuses, and then check for power to the bulbs check for power in and out of brake switch ...
What does it mean when the Emergency Brake and ABS lights are on at the time on a 1990 Ford Ranger?
I'm not a mechanic but I would start by checking the brake fluid level in the brake master cylinder in your engine compartment ...
Asked in Car Batteries, Honda Accord
How do you get the brake lights on your 1990 Honda Accord to turn off Everything else is turned off but the brake lights are still on and are draining the battery?
The brake light switch is stuck or out of adjustment. If it is a mechanical switch it is located somewhere on the brake pedal swing arm. If it is a pressure switch it is located near the Master Cylinder. ...
What is the problem when the hazard lights on a 1990 Chevrolet Silverado wont turn off so took the fuse out but then no brake lights or blinkers.?
Change out the switch. Bad switch!!