It is essentially a safety feature. The "neutral point" of the star (or Y) configuration in three-phase circuits would normally be at an electrical potential of 0 (zero) volts, but if the circuit is unbalanced the voltage at this point could rise considerably. If this point is earthed and any voltage appears at this point due to a circuit imbalance, an "earth leakage current" will begin to flow. This earth leakage current can be detected and used to trip a circuit-breaker to cut off the electrical supply for safety. Earth Leakage Circuit Breakers (ELCB) are commonly used in industry and around the home for reasons of safety.
At the centre of the Crab Nebula is the neutron star - Crab pulsar.
They are both fraternal organizations but the only connection is in order to be in the Order of Eastern Star (OES) you must have a male relative that is/was a mason.
Luminosity
That would be the sun. It is a star and provides the light and warmth required to support life and flowing water.
A colour cannot be assigned to a young star. It all depends on the mass of the star as to what temperature it will reach, and this temperature will dictate what colour it is.
An earthing boss and earthing lug are parts of a grounding connection. An earthing boss is in a casting that allows for the drilling and tapping of hole. A earthing lug is used to bond a wire to the ground.
there is never a switch in an earthing conductor in portable equipment the plug is constructed so that the earth connection is made first and broken last when removed
transformers transform
Four number earthing are essential for installation of transformer as under : 1) Two earthing for transformer body. 2) Two earthing for Neutral Point. Note : Numbers of earthing may be increase as per the client requirement.
Thats a good question
R = r1*r2/r1+r2
Yes, possible. NGR or earthing transformers are used when it is necessary to limit the fault current.
Earthing is always required. It is necessary so that a fault or overvoltage, such as caused by a lightning strike, may be conducted to earth (ground), either dissipating the energy and/or tripping the protective device.
For earthing pipe of 40mm dai & 3 mtr. Long required 5 kg. Of salt & 6.5 kg of charcoal. This type of earthing is done for distribution transformers of various rating.
The definition of star connection is a connection of the ends of phase windings at the star point.
Chemical Earthing and Conventional Earthing are different types of earthing techniques. Conventional Earthing is based on plate earthing and pipe type earthing but Chemical Earthing on GI or Copper.
As it's a safety factor, earthing is essential and mandatory. It's an electrical connection between the exposed metallic parts of an electrical appliance or installation and the earth, regarded to have zero potential. Proper earthing provides an alternative and easy path for leakage or faulty current to flow. It ensures that any exposed conductive part of the appliance does not reach a dangerous level of potential or voltage that endangers the user's life. A proper earthing system should have least electrical resistance, good corrosion resistance and ability of dissipating high faulty current.