Electric bulbs do have the inert gasses inside and not oxygen to avoid explosions.
Light bulbs have most of the air removed, that is there is a partial vacuum inside the bulb. So, when they break atmospheric pressure pushes the on the glass where it is weakened and air rushes somewhat violently into the bulb.
Glass is used in light bulbs because it's clear (passes the light through), can withstand the heat generated by the filiment and does not leak air to the inside of the bulb. And, it's cheap and easily formed into the required shape(s)
No, there is a vacuum or inert gas such as argon or nitrogen inside light bulbs to prevent oxidation and prolong the lifespan of the filament. Air does not play a role in the functioning of a light bulb.
Because if the thin filament wire was heated in regular air it would burn up.
If an electric bulb is filled with oxygen gas, the filament inside the bulb would burn brighter and hotter than if it were filled with normal air. However, this can be dangerous as oxygen supports combustion and can increase the risk of a fire hazard if the filament overheats. It is not recommended to fill electric bulbs with pure oxygen gas.
stay inside dont breath the air
It would no longer work. Light bulbs are usually under vacuum and if air gets in the filament blows.
Argon is used in light bulbs because it is an inert gas that does not react with other elements. This prevents the tungsten filament from reacting with oxygen in the air, which helps to prolong the life of the filament. Additionally, argon helps to maintain a stable environment inside the bulb, allowing the filament to operate at higher temperatures without burning out.
The instrument usually used to measure air temperature is the maximum minimum thermometer. It consists of a U shaped tube with bulbs at each end and mercury at the bottom. Air heats or cools the bulbs causing the air inside to expand or contract, therefore pushing or pulling the mercury upwards or downwards.
Assuming the question is referring to incandescent light bulbs (the ones with the glowing filament), Argon is the gas used.Argon is a harmless gas found in air, and is used because it cannot react with the hot filament.
probably an electric device that has a sensor inside as well as air
A common free standing or ceiling mounted fan simply circulates air round the room.