because its viscosity is not too low or too high its moderate
No lubricating oils are not. The reason is that they have to be able to withstand heat from friction of moving engine parts etc. They have very high boiling points and thus very low volatility.
The carbon allotrope we call diamond has the highest thermal (heat) conductivity of any material. It is far better an any metal (or anything else we know of) at allowing heat to pass through it. It is carbon (in its graphite allotrope) that has the highest electrical conductivity under normal conditions of any of the nonmetals. Any metal is a better electrical conductor, but carbon is good enough to make brushes for electrical motors out of. You'll recall that the brushes complete the electrical circuit between the wiring of the non-moving elements to the rotating commutator.
It means that you have no particular pattern as to which you move, you are moving without any meaning as to why you are moving or how you are moving
You determine it by were is it moving and when a bright streek is moving
It's a slow moving semiliquid.
Lubricating oil is used to reduce friction between moving parts and to prevent damage due to excess heat. Lubricating oil also carries away sludge preventing the erosion of moving parts.
The surface tension between the metal on your chain pieces is high. The surface tension is low on lubricants like oil or graphite so putting them between moving surfaces provides a opposing surface for both materials that has a low friction.
Reduces friction between moving parts.
They keep the engine and all the other moving parts from scraping together and going kaboom from overheating. The lubricating system primarily keeps the moving parts from rubbing each other too much.
So they dont stick and like expload!
To protect people from getting hurt by moving, sharp or hot pieces of machinery.
Unnecessary wear and stress will shorten the lifespan of the moving parts and machinery in general if vibration is allowed to continue.
lhjjhgrfjvhd
No lubricating oils are not. The reason is that they have to be able to withstand heat from friction of moving engine parts etc. They have very high boiling points and thus very low volatility.
friction is a force which opposes the direction of the movement of a certain body. reducing the friction between moving parts will lead to an increase of acceleration or speed of that particularly body.
Friction. It can be reduced by lubricating substances such as oil.
Lubricating them with products such as WD-40. It's something which needs to be done regularly.