Due to the added weight the person carrying on the back,normal centre of gravity of the combined body weight and the carrying weight shifted to new position.As a result a moment acts on the body of the man who is carrying the weight.To balance the moment the man needs to bend to achieve the stable condition.
Because if we are standing up straight it can cause injury, spinal problems, and it can also make us short.
Basically, you have to practice a lot. You could begin by practicing to do the bridge by walking down a wall with your hands. Then walk back up. Keep practicing this. Later, you can try doing the bridge (without a wall) on your bed (our your mom's). After a while, you can do a proper bridge!
wrought pipe bends means straight pipe bend using rotary draw pipe bender. or pipe bend by any method
Cut a straight piece of metal coat hanger, about 10 inches long. Bend it back and forth a few times. The point where the bend is will now be work hardened. *If you repeat this bending too many times, it will break because the hardening also makes it brittle.
possible noise with brakes
The RADIUS of a 5D pipe bend is actually what is 5 times the nominal diameter. So if you had a 10" diameter pipe, the radius of the centerline of the bend would be 50 inches.
the bricks on his back are heavy right and if he stood straight up the heavy weight would topple him backword so by bending forword slightly he is counter balencing the weight so the bricks are mobal
You should not bend down at the waist and lift up a heavy parcel using your back muscles. Always bend down at the knees, keep your back straight, and lift using your leg muscles.
Their vocal cords bend back while there esophogas breaths in and out.
Elbows do bend toward the back while pregnant. The only change that might happen to your elbows while pregnant is that they get extremely dry while pregnant.
It is how flexible you are. (think "can you bend down and touch your toes while keeping a straight back?" that is flxibility.)
Bend at the knees, keeping the back straight, and lift using the power of the thigh(quadriceps) muscles and calf (gastrocnemius and soleus) muscles.
how i learned how to do a back bend i went back on the wall and went down and you have to trust your self how i learned how to do a back bend i went back on the wall and went down and you have to trust your self
bend down
You can have someone spot you while you do it until you become better at it. It takes lots of practice and you have to be very flexible.
Leg over head bend thumb back splits
yes,just bend it backwards.I know how to bend my pointer finger back and that's what I do.Everytime I do it people say ewwwwwwwwwwwwwww
The 'Stub-up', or 90º bend, Back to Back Bends, Three Bend Saddles, and offset bends.