0
Battery dead
Wiki User
∙ 13y ago
Add your answer:
Earn +20 pts
What is the problem if all running lights and tail lights work but the brake lights don't on a 2000 F-250?
check the fuse, brake lights have their own, & check the brake switch at the top of the brake pedal
All lights working except brake lights. Is there a brake light fuse?
There should be a fuse for the brake lights. If the fuse is good always check the ground wire.
What is wrong when no brake lights and all other lights work 2004 dodge stratus?
I tried all the fuses, the parts that under the brakes I checked that. All lights come on and working except the brake lights no break lights.
What fuse controls the brake lights on a 92 Dodge Dakota. All lights and turn signals work except no brake lights when brake pedal is pushed?
Fuse 7 controls the brake lights. It should be a red 10amp fuse.
Why would you have no brake lights but all the other lights work?
Blown fuse or bad brake light switch?
Where are the brake lights located on a 2004 Toyota Sienna?
Um... Aren't all brake lights in the back of a car?
What fuse controls the brake lights on a 96 crown Victoria All lights and turn signals work except no brake lights when brake pedal is pushed?
If all the fuses are good, then most likely the brake light switch right on the brake pedal inside the car. Check that.
No lights on the rear at all Fuses and relays all goodAll front lights workI was wiring a trailer plug in and touched 2 wires together brake tail.Brake lights and tail lights were on.at time.?
changed brake light switch at pedal and still no brake lights
The brake lights dont work on my 1989 Mercury Grand Marquis but all other lights work?
change the brake lights check the fuse check the brake light swtch
What fuse controls the brake lights on 2001 Dodge Van all lights and trn signals work except no brake lights when brake pedal is pushed?
It is not necessarily the fuse. It could be the switch on the brake that is not closing the circuit.
What causes the brake lights to fail when all other lights are working fine?
The BOO (Brake On/Off) Switch may need to be replaced. If it is bad, it would cause the brake lights to NOT illuminate when the brake pedal is applied.
What would cause the brake lights not to work on an 84 corvette when all of the running lights work?
BAD BRAKE LIGHT SWITCH AT TOP OF BRAKE PEDAL
