0
What else can I help you with?
What gas is used to put fires?
Carbon dioxide (CO2) is the gas often used to put out fires, especially in fire extinguishers.
Is CO2 extinguisher used on electric fires?
Yes
What would happen if you tried put out a gasoline fire with water?
Mixing water with any burning oil is extremely dangerous. The oil/gasoline can splash away from the centre of the original fire cashing more fires to start, burn those trying to fight the fire etc. There are liquids used that are not water based but are liquid these are mostly used for chemical fires -On small oil fires form or Co2 gas is used to starve the fire of oxygen and put it out.
What would happen if you put out a gasoline fire with water?
Mixing water with any burning oil is extremely dangerous. The oil/gasoline can splash away from the centre of the original fire cashing more fires to start, burn those trying to fight the fire etc. There are liquids used that are not water based but are liquid these are mostly used for chemical fires -On small oil fires form or Co2 gas is used to starve the fire of oxygen and put it out.
Do you use CO2 to extinguish Liquid Fire?
The CO2 or the dry Chemicals can be used to extinguish Liquid Fire, though other extinguishes can be used like halogen extinguishers, BUT the halogen is doesn't help as much as it harms, because it causes a toxic gas, and there is Foam extinguishers they come handy too.
What is used to put out oil fires?
It's Sand..
How much co2 is put into the air when you light a campfire?
The amount of CO2 emitted from a campfire can vary based on factors like the size of the fire, the type of fuel used, and the duration of burning. On average, a small campfire can release about 2 kilograms of CO2 per hour, but this can increase significantly for larger fires or longer burning times.
What are 2 inert gases that can be used to extinguish fires?
I know that one is Co2, but I don't know the other one. Sorry.
What class fire extinguisher should be used on electrical fires such as desktop pcs?
Carbon Dioxide(CO2) or Dry Powder.
What fire extinguisher you use for each fire?
Class A: Used to put out fires involving combustible substances such as paper, wood, or plasticClass B: Used to put out fires consuming a flammable liquid, such as gasoline or oil, or a flammable gas like propane.Class C: Used to put out fires caused by electrical energy.Class D: Used to put out fires involving combustible metals such as magnesium, lithium or sodiumClass K: Used in kitchen fires involving deep fat fryers or other grease.The article below goes into more detail on fire extinguishers and the classes.
Why is carbon dioxide in fire extinguisher?
Fires need oxygen, and the CO2 (carbon dioxide) smothers the fire by keeping oxygen away. CO2 is only used for certain types of fire, mostly wood, paper, cloth, and electrical fires. The CO2 displaces the oxygen. You spray a fire at its base with an extinguisher. Fires draw oxygen from its base by way of draft. The CO2 from the extinguisher is picked up by the fire and does not support combustion. For very large fires, CO2 is not as effective because of the rapid flow of air into the fire, which is caused by higher temperatures. Water or foam is better at cooling the fire and making the flammable materials harder to burn.
Why mustn't water be used to try to put out oil fires?
coz
