Water could provide a path to ground for current. This path may be fairly high impedance; high enough that a standard breaker protecting the device would not operate. A ground fault interruptor is used to sense a "loss of current" to ground between the source and its' return. this can be much more sensitive compared to a typical overload breaker, and so provides better protection for this type of situation.
30 mAmp rating devices are commercially available.
Any devices that are added to a circuit and need the full line voltage to operate, are added in parallel to any other load devices or fixtures in the circuit.
Electrical Circuit:An Electrical circuit is that which is a connection of conductive wires and other devices whereby the flow of electrons occurs.Electronic Circuit:An Electronic circuit is that which contains at least one active element in a single circuit; whereby the flow of electrons is controlled by another electrical signal. (either voltage or current)In short, an electronic circuit is that in which electricity controls electricity...
Safety devices used in electrical circuits.AnswerA fuse is an overcurrent protection device, and will operate in the event of a sustained overload current or a short-circuit current.
No. You can have multiple devices on a series circuit. How about a low voltage Christmas tree light set. There you may have 15 or 20 lamps in series.
Electrical devices need an electrical circuit.
30 mAmp rating devices are commercially available.
Yes, in the form of GFCI circuit breakers, not as a receptacle.
A series circuit is one in which the current must pass through all the electrical devices in the circuit in turn. A parallel circuit is one in which the current passes through each electrical device on the circuit following separate, independent path from all other devices on the circuit, one for each electrical device.
Loads
circuit breaker
A complete electrical circuit occurs when it is possible for electrical current to flow through the electrical devices in it.
The electrical current for a home device travels in a circuit.
Any devices that are added to a circuit and need the full line voltage to operate, are added in parallel to any other load devices or fixtures in the circuit.
An electrical safety device that can be reset and used again fits the description of an electrical circuit breaker.
parallel circuit .
An electrical safety device that can be reset and used again fits the description of an electrical circuit breaker.