Means there is an overload on electricity
Circuit breakers do the same thing as fuses. They interrupt current flow when a certain preset point is reached. The difference between circuit breakers and fuses are that circuit breakers are resettable and reusable, whereas fuses are one time devices that must be replaced after they blow.
A vacuum breaker uses a vacuum to extinguish the arc when interrupting a circuit, while a SF6 gas circuit breaker uses sulfur hexafluoride gas. SF6 gas circuit breakers can handle higher voltages and currents compared to vacuum breakers. SF6 gas circuit breakers are also more environmentally harmful due to the greenhouse gas SF6, while vacuum breakers are considered more eco-friendly.
I had the same problem with our 1998 Pontiac GP. Both windows suddenly failed to operate. Checked the circuit breaker, that was fine. Could not find any other type of fuse related to the windows. The answer? The electrical pigtail that should have been plugged into the two window operating switches on the drivers side door had come loose. Once reconnected, all was well. (To access the wiring, just GENTLY pry up the switch panel from the bottom - below the two window switches.)
First thing I'd check is the fuse box. My dryer would sort of warm the clothes, but take forever to dry them. It turned out I had a weak circuit breaker. It would trip, but not vigorously enough to trip the counterpart that was connected to it. It looked like it was on, but it wasn't. Cycling the circuit breakers was good for a couple loads, then it would stop working again. I replaced the circuit breaker and never had another problem.
Too high a resistance is always not a good thing in a circuit. That's what "too high" means.
if the the motor is good you need to check the circuit breaker because the circuit breaker might be the problem. window doesnt go bad my dude the motor goes bad check it again
In residential wiring applications the most used is 14 gauge wire for light switches as long as the circuit breaker or the fuse is 15A. If your lighting circuit is on a 20A fuse/circuit breaker then you need to use 12 gauge wire
You can reset a breaker. Fuses are a one time use device. Once they trip or burn out due to a short, they are no good anymore and you need to replace it with a new one.
13 amp breaker. A fuse and circuit breaker perform the exact same function so they should be the exact same size. They protect the wiring within a circuit from overheating and catching on fire. A 13 amp breaker is a superior product that has a good chance of operating between 13 and 13½ amps, while a fuse might not blow until the current reaches 15 amps.
That's a good description of a fuse or circuit breaker.
ITS SHOULN'T BE JUST A FUSE IT SHOULD HAVE A CIRCUIT BREAKER TOO. THE CIRCUIT BREAKER OPENS IF YOU HOLD THE SWITCH TOO LONG. ITS 20AMP ON MOST CARS THAT I WORKED ON. ITS IN THE FUSEPANEL ON MUSTANGS. GOOD LUCK PAUL G
A series circuit is one is which all current is restricted to one path. A good example of a device that is series-connected is a circuit breaker.