A meter rule is apropriate as it can measure up to unlimited meter while micrometer is suitable for diameter since it has a high degree of accuracy to small diameters in millimeters.
A meter rule is appropriate for length as it can measure up to unlimited length while micrometer is suitable for diameter since it has a high degree of accuracy to small diameters in millimeters.
Rule is an instrumement to measure lengths of some meters or more; the accuracy is not in the range of millimeters.
To measure small diameters of wires (under 1 mm up to 3 mm) you need a more precise instrument as a micrometer screw gauge or a fine caliper.
The micrometer is more accurate because it can measure upto a millionth of a meter. Its least count is 1mm/100. Hence it can give more accurate readings compared to a vernier caliper.
A micrometer is used to measure very small distances.
There are 2 things that can be called a micrometer:1/ A device for measuring short distances accurately. Typically to better than 1 thousands of an inch (thou) or 0.01mm. They look a bit like a small G clamp, something is placed between the jaws and it is lightly tightened, the thread has a gauge on it so you can see how big the thing between the jaws is.2/ A very small distance, 1 millionth of a meter. Also written μm. (Or sometimes um.)Additional InformationThe above answer needs to be qualified. In fact, the above answer only applies to American English. In British English,1. A micrometer is an instrument for measuring small thicknesses or diameters, as per answer 1, above.2. The unit of measure is called a micrometre.In other words, in British English, a meter is a measuring instrument, whereas a metre is a unit of measurement.
First calibrate the micrometer by dialing the spindle to zero and adjusting the anvil until it is flush against the spindle. Measure the screw until the ratchet begins to click and take the first reading. This reading can then be compared to a machining book to verify the pitch diameter.
Diameter Index Safety System, a way to ensure that one type of gas fitting will only connect to appropriate hoses, tubing and devices.
nominal diameter is the original diameter of an object
With a inside measuring micrometer
caliper. Micrometer
A micrometer is used to measure very small distances.
*Micrometer have a rotary handle and whereas vernier have a slider. *Micrometer is for measuring diameters while vernier is for measuring inside & outside diameter as well as depth. *Least Count of Vernier Caliper is 0.02mm *Least Count of Micrometer is 0.01mm
You could use a simple ruler, or a micrometer for greater accuracy.
The size of most of the bacteria is between 4 to 10 micrometer. So the diameter of this rod shaped bacteria should be 4 micrometer and length is about 10 micrometer.
0.5-1 micrometer
Yes, a calibrated ocular micrometer can be used to measure the diameter or length of a field or object. Essentially, that is all that it is used for.
Yes, a calibrated ocular micrometer can be used to measure the diameter or length of a field or object. Essentially, that is all that it is used for.
calipers can measure its diameter and check for roundness. Water displacement can measure its volume.
.0075 meter
Micrometer