because the hand is too dry and the handle is wet
First on the door handle (carefully). Then on any thinner panel.
it is easier to open a door using the handle, opening from the hinges is much more difficult... FACT
To remove the handle the inside door panel has to come off,with the window up.there is a small bolt insde and one at the end of the door by the handle take those two off and the linkage inside...yes you need small hands.
To remove the door panel, there are two screws you need to remove which are located under the door handle(the one you use to pull the door to close it) ,the you need to remove the mirror adjusting knob by pulling it out, then remove the window handle ( there is plastic ring around the handle which comes between the handle and the door, you need to pull it up using a screwdriver then simply pull the handle out), then just pull the door handle out with a screwdriver from the edges or preferably with your hands.
Changing the door handle isn't very difficult. Which is good considering the cheap plastic they made them out of. The standard procedure pretty much applies; 1) Remove the interior door trim panel 2) Disconnect the linkage attached do the door handle 3)Change the door handle 4)Re-assemble I don't remember the details of what scews / bolts have to be removed, but the whole job is pretty simple. The only variation is for whether it is an inside or outside handle, and really that only changes the linkage that you remove. I have changed both an inside and outside handle, on opposite doors of course... Didnt take me long at all.
You can replace the inside drivers door handle by removing the door panel. With the door panel removed the door handle mechanism will be visible. Remove the linkage from the door handle. Remove the door handle retaining bolts. Reverse the process to install the new door handle.
Remove the door trim panel. Remove the inside door handle rod. Remove the inside door handle retaining rivets. Remove the inside door handle from the door by sliding the handle rearward.
Inside door handle or outside door handle?
Remove the inside door panel of your 1987 Chevy. Remove the linkage from the door handle. Remove the door handle retaining bolts. The door handle will come off.
Remove the inside door panel. Remove the door handle linkage. Remove the door handle retaining bolts. The front door handle will come off.
Inside handle, outside handle, sliding door handle?
Remove the 1992 Dodge Dakota inside door panel. The door handle mechanism will be visible. Remove the door handle linkage. Remove the door handle retaining bolts.