Want this question answered?
No you do not centrifuge blood for a CBC. This could cause issues when reading the results.
To build a centrifuge you first need to decide what G force you need to generate. This is a function of the distance that the unit to be centrifuged is from the center axis and the rotational frequency (RPM). A major difficult you might run into is balancing the unit you make. The basic components of a centrifuge are the motor, case, rotor, and shield. The rotor holds the tubes, the case holds the motor in place and is a sturdy base, the shield protects you from any debri that could be thrown from an unbalanced rotor. If you MUST build a centrifuge you will need to learn to machine an accurate and balanced rotor. You are really just better off buying one. If you are in search of a cheap and simple centrifuge for playing with, use some tubing and an egg beater like these students did: http://www.rsc.org/delivery/_ArticleLinking/DisplayHTMLArticleforfree.cfm?JournalCode=LC&Year=2008&ManuscriptID=b809830c&Iss=Advance_Article
Groups have equal and balanced composition
Centrifuge
exzample by spiining bottles in a machinr
To beat you if you haven't balanced the centrifuge before spinning, lol.
Add tubes to your centrifuge basket arranged as factors of the total number of spaces. For instance, if you have a twelve hole centrifuge, you can add tubes in every second hole, for six tubes in total; in every third hole for four tubes in total, in every fourth hole for three tubes in total; or every sixth hole for two tubes. You can combine these factors one way to place five tubes in your centrifuge basket - a balanced array of two and a balanced array of three tubes. As well as that, you can arrange the gaps in your centrifuge basket the same way, so you can have five , four, three or two tubes left out of a twelve hole basket. In that way it is possible to place two, three, four, five, six, seven, eight, nine, ten or twelve tubes safely in a twelve hole centrifuge basket.
it is important for your cells to have a balanced diet because you need to have a healthy body.
The tube is not so important . It's the centrifuge that does the work.
That sounds like density centrifugation...So, a centrifuge?
A centrifuge has holes to insert the centrifuge tubes in, a cap to secure the tubes inside, and a lid to protect both the samples and experimenter in case of malfunction. There is also typically a way to set the centrifuge speed and a power switch to turn the centrifuge on and off.
Antonin Prandtl, however Gustof de Laval invented the first "Modern" centrifuge. http://en.wikipedia.org/wiki/Centrifuge
centrifuge is a system which is used to separate the water from the diesel.
Using centrifuge: brill idea
A Centrifuge Swing-out Rotor is a part of a centrifuge which attaches to the motor and holds the sample tubes. A swing-out, as opposed to a Fixed Angle rotor, has holders that move from vertical to horizontal as the centrifuge speeds up.
very important!!
A centrifuge is used for separating components in a liquid that have different weights.