It is important to have the right sub woofer enclosure because different enclosures can affect the quality of the sound. Sealed boxes offer better sound quality but you will sacrifice volume. Ported boxes offer better volume, but the sound quality is not as good.
The Legacy subwoofer comes in an oak enclosure for very solid sound.
THE SUBWOOFER IS LOCATED IN AN ENCLOSURE BEHIND THE REAR SEATS. THE SUBWOOFER IS LOCATED IN AN ENCLOSURE BEHIND THE REAR SEATS.
No enclosure. It's a free air sub.
Tricked Out - 2004 2001 Celica Acrylic Subwoofer Enclosure 1-13 was released on: USA: 2005
To reseal your subwoofer, first, remove the subwoofer driver from the enclosure by unscrewing it carefully. Clean the edges of the enclosure and the driver to remove any old adhesive or debris. Apply a high-quality adhesive or silicone sealant along the edges of the enclosure and around the rim of the driver. Finally, reattach the driver, ensuring a snug fit, and allow the adhesive to cure according to the manufacturer's instructions before testing the subwoofer.
In order to install a subwoofer you need: enclosure for sub, Amplifier, and an Amplifier kit. These three things can be found at an electronics store or online.
The best type of subwoofer for classical music is a sealed enclosure. This will have a tighter, cleaner sound. Try the Rockford Fosgate Prime R1L-1X10 Sealed enclosure.
Purchase a subwoofer speaker (also known as a component subwoofer). The component subwoofer is the actual speaker you'll be mounting into the enclosure you build. Crutchfield.com is an excellent resource for reviewing and purchasing component subwoofers
Between the front seats, mounted in the same enclosure as the speaker. The only reason I know is I blew the subwoofer and when I pulled it, I found the amp!
a transverse multi-sided enclosurer (sealed or with a hole)
Nefer Audio provides custom fiberglass subwoofer enclosure kits. These kits allow the owner to choose the appropriate size for the fiberglass speaker rings to make for the best possible fit and sound. Nefer Audio can be found at http://www.neferaudio.com/kits/kits.htm
To remove the subwoofer from your 2004 Jeep Rubicon, start by disconnecting the vehicle's battery to avoid any electrical issues. Then, carefully remove the rear panel or cargo area cover to access the subwoofer. Disconnect the wiring harness and unscrew any mounting screws holding the subwoofer in place. Finally, gently pull the subwoofer out of its enclosure.