The wider the forks are, the more stable the load is. Imagine balancing a dinner plate on a single ruler, very unstable. Now use two rulers 8 inches apart. The dinner plate is now more stable and less likely to fall and smash on the floor.
as wide apart as the freight will safely allow.
as wide apart as the freight will safely allow.
Your forks should be as close to the ground as possible when carrying a load to ensure stability and minimize the risk of tipping. When not carrying a load, your forks should be raised to the height recommended by the manufacturer to prevent damage to the forks and improve visibility.
The forks should be as close to the ground as possible.
The forks should be as close to the ground as possible.
as wide as possible to prevent the load slipping sideways
You always keep the forks (and the load) as low to the ground as possible. This holds true for forklifts, front end loaders, etc.
In the widest position possible, centered, under the pallet, all the way in.
In the widest position possible, centered, under the pallet, all the way in.
In the widest position possible, centered, under the pallet, all the way in.
The best way to carry the load is backwards and with the forks up. When you put the forks up, you will shift the weight of the load towards the middle.
Tilt is always "back" - toward the machine - so the load won't slide off the forks. It's recommended to tilt the load back as far as can be done safely. If you have a stable pallet, the best thing to do is tilt as far back as the machine will let you. More important is load height. Until you absolutely MUST lift the load, keep it about four inches off the floor.