0
Want this question answered?
Be notified when an answer is posted
Add your answer:
Earn +20 pts
How to setup canon TR4500 Printer?
Here is an complete setup for canon TR4500 Printer. To avoid harm during shipping, the PIXMA TR4500 printer is shipped safely in a box. When opening the carton, use scissors to ensure that all of the supplies arrive in good condition. Remove your Canon printer and put it somewhere that is well ventilated and dust-free. On your printer, there will be protective tapes; remove them. The power cable should be inserted Attach one end of the power cable to the power supply and the other end to the back of your printer. Switch on the Canon PIXMA TR4500 printer and go over the basics. Close the rear tray after placing a stack of paper in it. Place the cartridges in their proper slots. If you are still Facing problem in installation call us at +1-888-479-5919.
How to reset canon mg2570s printer?
1: Turn off your Canon printer. 2: Remove its power cable from the power source to ensure that your printer is disconnected completely. 3: Wait at least 30 seconds. 4: Plug the power cable back in and connect the cable to the printer. 5: Turn on the printer.
How can you reset your Canon Pixma mx700?
with most canon printers the factory reset is done by unplugging the unit, and holding the power and cancel button while it is plugged back in again.
Why is my canon mx420 pixma not responding to print?
Here are a few things to do:1. Check to make all cords are connected, and the power is on.2. Go online and find/install drivers for the Canon Pixma MP470. A simple Google search will find it. Be sure to download the correct version-- whether it's 32 bit (x86) or 64 bit (x64)3. Go to your computer's control panel, then click "Hardware and Sound", then "printer" to make sure it's being recognized by your computer. If it is, make sure that it's set as the default printer.Without any more information, that's all the advice I can give you.
How do you reset canon i550 printer mode?
Try the following to reset your canon i550. Turn off printer. Hold down resume button, press power button. Keep holding down power button, release resume button. Press resume button twice, then release both buttons. Green lights should flash. When green lights are stead, press the resume button four times. Press the power button once to turn the printer off. (If it doesn't turn off, press the power button again.) Your printer should now, hopefully, start up normally.
How do you resolve E50 error in Canon Printer?
Is your Canon printer showing the e50 error code, and do you want to solve it? Your printer can show this error code when it is facing a failed fuser problem. If your device shows this issue, then you will not be able to print any documents. You can try various steps to fix this issue from your Canon printer. Below are the steps you need to follow to do that. Pressing and holding the STOP/RESET/Resume button for at least 10 seconds. Inspect the LAN connection and internet connection on your device. Make sure that the ink cartridge is installed properly in your device. Restart your Canon printer and computer device. Change the fuser unit from your printer device. Update the printer driver.
How could you solve the error 225 in canon-i-sensys-mf4330d?
Canon i-SENSYS MF4330d error code 225 typically indicates a communication error between the printer and the computer. Here are steps you can take to try and resolve this error: Restart the Printer and Computer: Sometimes, a simple restart can resolve communication issues. Turn off the printer and computer, unplug them from the power source, wait for a few minutes, then plug them back in and turn them on again. Check Connection Cables: Ensure that all cables connecting the printer to the computer are securely plugged in at both ends and not damaged. If using a USB connection, try using a different USB port on the computer. Verify Network Connection (If Applicable): If the printer is connected to a network, ensure that the network connection is stable and working properly. Check the network cables, router settings, and printer settings to confirm the connection. Update Printer Drivers: Make sure that you have the latest drivers installed for your Canon i-SENSYS MF4330d printer. Visit the Canon website to download and install the most up-to-date drivers for your printer model. Check Printer Settings: Verify the printer settings on both the printer and the computer to ensure they are configured correctly. Pay attention to settings such as printer status, paper size, paper type, and print quality. Perform Printer Troubleshooting: Some Canon printers have built-in diagnostic tools or troubleshooting functions that can help identify and resolve communication issues. Consult the printer's user manual for instructions on how to perform these tests. Reset Printer Settings: Resetting the printer to its default settings can sometimes resolve communication errors. Refer to the printer's user manual for instructions on how to perform a reset. Contact Canon Support: If the error persists after trying the above steps, it's possible that there may be a more serious hardware or software issue with the printer. In this case, it's best to contact Canon customer support or a qualified technician for further assistance. By following these steps, you may be able to troubleshoot and resolve the Canon i-SENSYS MF4330d error code 225. If the issue persists, professional assistance may be required.
Where can one buy a Canon Power Shot?
One can buy a Canon Power Shot from RadioShack, Canon, and Best Buy. One can also buy a Canon Power Shot from B&H Photo-Video, Amazon, OfficeMax, and Sears.
Service error for canon laser shot lbp-1210?
If you're encountering a service error on your Canon Laser Shot LBP-1210 printer, it can be a bit challenging to pinpoint the exact issue without specific error codes or messages. However, you can try the following general troubleshooting steps: Turn Off and On: Power off the printer, unplug it from the power source, wait for a minute or two, and then plug it back in. Turn the printer back on and see if the error persists. Check for Paper Jams: Ensure that there are no paper jams inside the printer. Open the paper tray and inspect the paper path for any stuck or crumpled paper. Inspect Toner Cartridge: Make sure the toner cartridge is properly installed. Take it out and reseat it to ensure it's securely in place. Reset Printer Settings: Access the printer settings through the control panel or software interface and perform a factory reset if possible. This can help resolve software-related issues. Update or Reinstall Drivers: Check if there are any updated drivers for your printer model on the Canon support website. Download and install the latest drivers, or reinstall the existing ones. Check for Firmware Updates: If your printer has firmware that can be updated, check the Canon support website for any available updates. Firmware updates can address certain hardware-related issues. Inspect for Obstructions: Look for any foreign objects or obstructions inside the printer. Ensure that no small items or debris are blocking the internal components. Consult the User Manual: Refer to your printer's user manual for specific error codes or messages associated with the service error. The manual may provide guidance on resolving the issue. If these steps do not resolve the service error, it's recommended to contact Canon support for further assistance. Canon's official support channels can provide specific guidance based on the error code or message displayed on your printer. You may find a dedicated support hotline, live chat, or email support options on the Canon support website.
Where is the power switch on a HP laser jet 1000 printer?
There is no power switch on the HP LaserJet 1000 printer.
They bought you a canon printer and it did not come with a CD Rom you want to know how to download it so that you can use your printer?
look on the www.canon.com website under support & drivers section. you should be able to do a search for the printer model you require and select which windows version you are using and download the correct driver. plug the power and usb cables into the printer and computer and then you can run the software you downloaded. more than likely, the computer will find the printer automatically when you plug all the cables in, then you can tell the computer when it asks where you saved the download and the software will install.
Lexmark 3430 printer which will not turn off without unpluging Any suggestions?
Double-check on the power button on the printer, make sure it's not stuck. If not, unplug the power adapter from the printer. The power adapter is the black box behind the printer where the power cord is attached. Wait at least 30 seconds before plugging it back in. That should refresh the printer. Hope this helps.
