There is a problem with the Anti-locking brake system.
You will need a OBD2 engine scanner to find out what is wrong with it.
Have engine scanned.
Will need to go into ABS mode with the scanner to get the codes.
Why will my abs break light and seat belt light stay lite on the dash of a 2003 chevy Tahoe while the motor is running? Please help. Thank you.
If the original problem that caused the abs light to come on was fixed, the light will reset itself after a short drive. If the light remains on, you still have a problem with the abs system.
You have a problem with the abs system. Once the problem is fixed the light will reset itself.
The abs light is on because you have a problem with the system and it will remain on until the problem is fixed.
When my 2003 suburban did it. It turned out to be bearings. After replacing the bearings, no problems since. The bearing assembly has abs sensor attached.
Is your abs light on?If it is,check your rear wheel speed sensor inputs.It needs those inputs to shift the tranny.
Where is the abs module located on a 2004 Chevy Tahoe
Thereis no resetting an ABS light you have a problem that has to be repaired to turn that off.
The abs light is on because you have a problem with the abs system. The light will remain on until the problem is fixed. Once the problem is fixed the light will reset itself.
Likely cause is an electrical problem in the EBCM. Unfortunately it is replaced w/ the abs pump as they are one unit. Very pricey!
scanner
The ABS light is on because there is a problem with the ABS system. Until the problem is fixed the ABS light will remain on and the ABS system will not function if needed. Once the problem is repaired, the ABS light will reset itself.