The abs light is on because you have a problem with the abs system. The light will remain on until the problem is fixed. Once the problem is fixed the light will reset itself.
There is not a reset switch.
turn the parking lights on and off 3 times
disconnect your battery and then reconnect. The light should reset and turn off.
Listed in detail in your owner's manual. Don't have one then you need to get one.
How do I reset the service engine light on a 2003 Chevy Trailblazer?
Fix a "door ajar" on Chevy Impala 2003 . Still on doors closed.
To reset the Passlock system on a 2003 Chevy Impala, first, insert the key into the ignition and turn it to the "On" position without starting the engine. Leave the key in this position for about 10 minutes until the security light turns off. Then, turn the key to the "Off" position for a few seconds and repeat the process two more times. After the third cycle, the Passlock system should reset, allowing you to start the engine.
To reset the check engine light on a 2003 Chevy Impala, you can disconnect the negative battery terminal for about 10-15 minutes. This will clear the engine control module's memory. Alternatively, you can use an OBD-II scanner to read and clear the trouble codes, which will also turn off the check engine light. Keep in mind that if the underlying issue isn't resolved, the light may come back on.
You can either bring it in to a Chevy dealer or use a programmer/tuner to reset the check engine light.
do you need to remove dashboard in 2003 chevy impala to replace heater core
There is not a reset switch.jd
The 2003 Impala has a 17 gallon fuel tank