In any machine, some energy will usually be wasted. This will reduce the efficiency below the theoretical maximum of 1.0. However, please note that, if the efficiency is above 95% (or 0.95), when rounded to the nearest tenth you will get 1.0.
In any machine, some energy will usually be wasted. This will reduce the efficiency below the theoretical maximum of 1.0. However, please note that, if the efficiency is above 95% (or 0.95), when rounded to the nearest tenth you will get 1.0.
In any machine, some energy will usually be wasted. This will reduce the efficiency below the theoretical maximum of 1.0. However, please note that, if the efficiency is above 95% (or 0.95), when rounded to the nearest tenth you will get 1.0.
In any machine, some energy will usually be wasted. This will reduce the efficiency below the theoretical maximum of 1.0. However, please note that, if the efficiency is above 95% (or 0.95), when rounded to the nearest tenth you will get 1.0.
In any machine, some energy will usually be wasted. This will reduce the efficiency below the theoretical maximum of 1.0. However, please note that, if the efficiency is above 95% (or 0.95), when rounded to the nearest tenth you will get 1.0.
Efficiency effectiveness can only be measured by results; cost efficiency, time efficiency, output efficiency, etc.
Efficiency is measured in joules.
efficiency wage
society can achieve either productive efficiency or allocative efficiency, but not both simultaneously
it's the Primary part of the efficiency.
what is budgets achievable
what is budgets achievable
Efficiency Medal was created on 1930-10-17.
The word achievable is an adjective. It describes something that can be achieved.
10-15%
Efficiency = Output value / Input valueFor example, if a machine needs 10 KW to run and produces 8 KW, its power efficiency is 8/10 = 0.8 or 80%Efficiency is always between 0 and 1 (or 0 and 100 if expressed as a percentage.)
If joint efficiency is 0.7 then there is no radiography,if it is 0.85 then 10% radiography of the total length of welding and if joint efficiency is 1.0 then 100% radiography is required.
Achievable.
0.10, or 10%
Achievable Believable Receivable
Overachieve
The highest level you can go is level 20.