0
Most likely, you bought a replacement bulb that is lower in wattage than the old/stock headlight. So the light output is lower.
If you want your headlight to look brighter, you might want to consider upgrade to an HID kit. It's becoming a lot more inexpensive these ways. They used to cost around $700USD.
Check this out, they have free shipping too.
http://www.carpart4u.com/autopart/XTUNE-HID-Conversion-Kit-10000K-9006-HB4-p-16050.html
What else can I help you with?
How do you change headlight on porsce 996?
old headlight out, new headlight in pretty easy if you ask me
How do you change a head light on a 1999 Mercedes Benz s420?
Acquire a new headlight. Take old headlight out. Place new headlight in. Voila
How do you Replace bulb in headlight of 1992 Dodge Spirit?
The first thing to do is go and buy the replacement bulb. Behind the headlight there is a round ring unsrew it pull out the bulb (which is attached to the wires). When you look at the old bulb base and your new replacement you will know what to do. Just unplug the old bulb housing and plug in the new.Putting the round ring and bulb housing back on can be a chore but it just just takes a little time.
How do you remove the old headlight in a 2000 Mitsubishi eclipse?
2000 Mitsubishi Eclipse headlight bulb replacement: Purchase the correct replacement headlight bulb(s) first, before disassembling the vehicle. See sources and related links below for replacement bulb information. Then consult your owner's manual for the headlight bulb replacement procedure. As simple as it sounds, the owner's manual is the best place to start for bulb replacement instructions and illustrations. You may want to consider replacing both left and right at the same time in order to keep brightness and color equal (optional).
How do you change headlight bulb on a 2008 Colorado?
To change the headlight bulb on a 2008 Colorado, you will first need to access the back of the headlight assembly under the hood. Locate the bulb holder and twist it counterclockwise to remove it. Carefully pull out the old bulb and replace it with a new one, ensuring it is securely in place. Finally, reinsert the bulb holder into the headlight assembly and twist it clockwise to lock it in.
Do it Yourself Headlight Replacement?
It is possible to take a car or truck to an automotive repair shop to have a headlight replaced when it has gone out. Headlight replacement is a relatively easy task, however, that can be done at home by anyone who knows how to use a screwdriver. Determine That the Headlight Needs to be Replaced The first step is to find out if the old headlight really needs to be replaced. It is possible that the light has stopped working for reasons other than it has burned out. Check to make sure that the fuse for the headlights is still good. Wiggle the headlight or screw it in more tightly to make sure that the connection is sound. If that does not work, remove the headlight and look to see if the filament has been broken. If so, you will need to find a replacement headlight. Purchase the Correct Headlight There are several different kinds of headlights because there are several different kinds of cars. Many of the cars produced in the last 10 years are equipped with headlights that are not supposed to be removed from the car. The only part that has to be replaced on these cars is the tiny bulb that fits in behind the headlight. You can remove the bulb by twisting it and pulling it free from the headlight assembly. Some older cars require that you purchase the entire headlight assembly in order to replace a burned out bulb. You can find a list of headlights for all makes and models at your local auto parts store. Removing the Headlight and Replacing it When you have the replacement bulb and are ready to put it in the car, all you have to do is reverse the action you took to pull out the old headlight. If you are only replacing the bulb, slip the new bulb into the base and then push it through the hole in the back of the headlight. Twist it to make sure it is secure and you are done. If you need to replace the entire headlight assembly, unscrew the screws that attach the headlight to the car. Disconnect the old light and connect the new one.
How do I replace the truck headlights?
Truck headlights can be found at your local auto supply store. Unscrew the cover for the old headlight, remove it and then remove the old headlight. You will need a screwdriver and possibly a wrench for this. Next, replace the broken headlight with the new one, and replace the headlight cover. Lastly, check to make sure the new headlight works.
How do I change the headlight bulbs on my 2003 Toyota matrix?
To change the headlight bulbs on your 2003 Toyota Matrix, first, open the hood and locate the headlight assembly. For the bulb replacement, twist the bulb socket counterclockwise to remove it, then pull the old bulb out. Insert the new bulb into the socket, making sure not to touch the glass with your fingers, and twist it clockwise to secure. Finally, reconnect the wiring harness and test the new bulb before closing the hood.
How to Replace a Headlight?
If you drive an automobile, you will have to eventually replace the headlights. Headlight replacement typically is required every two years on most automobiles. Many automobiles that are new will still be under the factory warranty so you can take the automobile to the dealership where you bought it and have them replace the current headlights and maybe burned out or destroyed.Headlight replacement can take a few hours to do but it is not complicated. If you plan to try this at home make sure you have the adequate tools and yet searched the internet to find proper instructions depending on the make of your vehicle. Once you have found instructions for your vehicle on headlight replacement go ahead and print them out. You’re going to want to have the instructions close by so if you have any questions or for you to print out sheets and continue on with the project.Headlight replacement begins by removing the headlight from the car. You will have to open up the hood of the car and look at the headlights. There will be a switch to unlock the headlight and you will just simply pull the headlight out of the car. After the old headlight is removed, go ahead and put the new headlight in.Once the new headlight is in place you can now turn the switch to the lock position so the headlight will be totally secure and safe to use. The next step is to do the same thing to the opposite headlight making sure you unlock and lock the switch correctly. If you do not lock switch correctly after the new headlight is installed you will run the risk of having a headlight fallout and dangle in front of the hood while you’re driving down the road. This can be extremely embarrassing and dangerous to your car.Before you take your car out and drive it make sure the headlights work. It is recommended that you test them by turning the headlights on and off and making sure the high beams work. If the headlights do not turn on or off then you know the installation has not gone correctly and you will have go through the entire process again
How do you replace the headlight bulb on a 2003 Nissan Pathfinder?
Take a hammer. smash the headlight assy. lens. Remove old bulb, put in new.
Daytime running light replacement vw passat?
Replacing a daytime running light on a VW Passat is the same as changing a headlight bulb. First prop the hood open and located the headlight housing. Removing the old bulb and replace it.
What is replacement of fixed assets?
Replacement of fixed assets means to sale out the old assets and acquire a new one or replace old piece of asset with new one in exchange with same vendor.
