answersLogoWhite

0

Why is there metal shavings in my 220K kilo Honda accord tranny? Do i repair or replace it?

User Avatar

Wiki User

13y ago

What else can I help you with?

Related Questions

Is it true that metal shavings are good for automatic transmissions?

Metal shavings are never good inside any transmission.


Why are their metal shavings in your 1996 Ford Taurus Transmission pan?

some metal in pan is ok.


Why are there metal shavings in your 1993 Ford Aerostar Transmission Pan?

clutchplates are going out, (poor mantenance)


What does metal shavings in a trasmisson pan mean?

It means the transmission is failing. It is caused by gears grinding or rubbing.


What do you do if you have metal shavings in the transmission fluid?

it can be normal to find some small metal shavings and metal flake, this usually accumulates on a magnet in the pan of an automatic, if the vehicle is operating properly, i would just replace the fluid and filter,if equipped and use the car, unfortunately not much can be done beyond this without removal and disassemby of the transmission


There is metal shavings in your oil?

Yes!!! Oils contains a metal shavings but it is not harmful...


Why would there be metal shavings in the transmission pan of a 1994 Pontiac Bonnieville with the 4T60E transaxle?

A small amount of shavings is normal. That is why there is a magnet inside the pan to collect the shavings. A large amount or large pieces of metal is not normal and will require a professional to diagnosis. It it has run good and has not had shifting problems, or strange noises, then it is most likely fine. I just rebuilt my son's 4T60E transmission for that very problem. I found two sources of the metal shavings: The teeth on the reverse reaction drum (stove pipe) and the spyders for the differential in the final drive carrier were in the process of shelling out. Chuck Check to see if there is a recall on your transmission.


How do you sepeerate metal shavings and pepper?

One way to separate metal shavings and pepper is to use a magnet to attract the metal shavings, leaving the pepper behind. Another method is to use a sieve or strainer to filter out the metal shavings while allowing the pepper to pass through.


My 99 infiniti g20 engine to stall when engine is cold during take off in drive or reverse.?

Change your transmission oil it happen to me . And have your mechanic check the transmission you might have metal shavings in the transmission which is really bad.


Which can opener has no metal shavings?

A smooth-edge can opener is designed to cut along the lid's seam without leaving sharp edges or metal shavings. These can openers have a safer design that minimizes the risk of metal shavings contaminating food.


How do you repair a cadillac 1994 fleetwood Brougham transmission with trouble switching gears?

Take the car to a reputable transmission shop and have then perform a transmission flush and filter change. Have them inspect the inside of the filter and transmission pan magnet for metal shavings. The transmission may need to be rebuilt.


Is metal shavings a chemical contamination?

False