My Sky DigiBox is like broken... My remote can detect the DigiBox and makes a red light (right side) but the other light (left light) for if the sky channel should show or not will never go green. I re-connected everything took out the wires of the DigiBox and re-attached them but nothing happens. It just stays the same.
Please help me.
remote sensing
Click the analog button in the center of the remote ,and a green light should appear on the remote if done correctly.
Depends. If the light has a sign next to it that says 'Yield on green light' it means you can go when the light is green and there is no traffic coming from the opposite direction that could hit you. If there is no sign wait for the arrow.
They ae red
The light on the dual charger will turn green. When it is charging the light is red.
If you want to add a remote, press the "set" button on the power unit until the green light blinks, then press the button on the remote. If you want the unit to forget all old codes and accept only the new remote, hold the "set" button until the green light stays on solid, then press the remote button.
if your question refers to the 1 green light then your xbox is telling you that 1 remote is connected to it
The left turn has right away
The disease that turns plants white, caused by lack of light, is called Etiolation.
Supposing you have a remote to control the light, the remote for the light and the remote for the TV are probably on the same frequency.
A remote light switch is a switch that triggers a light by remote. You can get one installed through your local home department store and have it rigged up to a universal remote.
It means that either turns can be made in the direction shown by the green light or that a stop must be made before turning in the direction shown. Either way, turns are permitted.