To remove the overflow bottle of a ford escort 1993 you need to: 1. Unbolt the PS fluid reservoir and move it out of the way. Don't take any of the hoses off. 2. Disconnect the electrical plug on the coolant overflow bottle. 3. Remove the overflow bottle mounting bolts. Lift the bottle, disconnect the overflow hose and take out the overflow bottle.
The overflow bottle may overflow if: 1. The car is overheating - this means after the coolant in the radiator gets heated up and expands it flows to the reserve bottle but the radiator doesn't cool down to suck back the coolant from the overflow bottle, but just keeps on sending coolant to the bottle. 2. You may have put excess coolant in the bottle - hence heated coolant from the radiator didn't get enough space.
no antifreese
Coolant is added to the overflow bottle instead of the radiator. The overflow bottle will allow fluid to fill over into the radiator.
yes
Radiator Coolant level in the overflow bottle is low. Fill the overflow bottle with coolant. If you have coolant in the bottle, the switch is stuck. Remove the whole overflow bottle and clean with some CLR (calcium, lime, rust) remover.
The bottle will expand and overflow.
Bad radiator fluid.
Overflow Bottle.
Engine is overheating.
To change the radiator overflow bottle on a 2004 Mazda RX-8, first ensure the engine is cool and disconnect the negative battery cable. Remove the hoses connected to the overflow bottle and unscrew any mounting bolts or clips holding it in place. Install the new overflow bottle by reversing the removal process, reconnect the hoses, and refill the coolant as necessary. Finally, reconnect the battery cable and check for leaks.
On the coolant overflow bottle