Want this question answered?
wire will be heated with out any loadAnswerNothing. It simply means that the current becomes leading if it was lagging, or vice-versa.
The load current in an electrical system isn't determined solely by the power factor. The power factor, which can range from -1 to +1, is a measure of how effectively the electrical power is being converted into useful work output. A power factor of 1 (or 100%) signifies that the power is being used entirely effectively, with no reactive power. However, to determine the load current, you would also need to know the power (in watts) and the voltage (in volts) being used in the system. The formula to calculate current (I) is: I = Power (P) / Voltage (V). So, if you have a power factor of 1, it means that all the power is being used effectively, but it doesn't directly determine the load current.
Reduce the harmonic current in the electrical supply system.
On a three phase system, when one of the leg fuses opens due to a fault current on that leg, the system is said to be single phasing.
As it's a safety factor, earthing is essential and mandatory. It's an electrical connection between the exposed metallic parts of an electrical appliance or installation and the earth, regarded to have zero potential. Proper earthing provides an alternative and easy path for leakage or faulty current to flow. It ensures that any exposed conductive part of the appliance does not reach a dangerous level of potential or voltage that endangers the user's life. A proper earthing system should have least electrical resistance, good corrosion resistance and ability of dissipating high faulty current.
The electrical grid distributes alternating current(AC).
wire will be heated with out any loadAnswerNothing. It simply means that the current becomes leading if it was lagging, or vice-versa.
There is a short circuit somewhere in the electrical system.
improvement of power factor
The load current in an electrical system isn't determined solely by the power factor. The power factor, which can range from -1 to +1, is a measure of how effectively the electrical power is being converted into useful work output. A power factor of 1 (or 100%) signifies that the power is being used entirely effectively, with no reactive power. However, to determine the load current, you would also need to know the power (in watts) and the voltage (in volts) being used in the system. The formula to calculate current (I) is: I = Power (P) / Voltage (V). So, if you have a power factor of 1, it means that all the power is being used effectively, but it doesn't directly determine the load current.
Alternating Current.
noAnswer'Power factor' is a quantity associated with alternating-current systems, and does not apply to direct-current systems'.
The ampere (symbol: A) is the SI Base Unit for electric current, and is defined in terms of the force between two, parallel, current-carrying conductors.
Reduce the harmonic current in the electrical supply system.
the maintenance of homeostasis by the factor of feedback machenism..
In an alternating current system, the voltage and current may or may not rise and fall at the same time. In resistive circuits it does but the current in other cases may lead or lag the voltage. For a single phase system Power = Power Factor * V * I The power factor is the cosine of the angle between V and I and is a maximum (1) in resistive circuits.
Alternating current (AC) is easier to transmit over long distances than is direct current (DC).