Want this question answered?
In regards to a water chiller unit, the terms low pressure and high pressure refer to the compressor, which takes low pressure and compresses it into high pressure gas, which is then turned into a liquid to cool the unit.
gas or electric? gas
10 psig
Refrigerant enters the compressor inlet as a low pressure vapor. The compressor increases the pressure, and discharges it as a high pressure vapor.
the rupture disc is piped off the chiller barrel (evaporator) and will vent the refrigerant outside incase of over pressure of the unit
On a low-pressure chiller picture, the rupture disc is located on the evaporator housing. There should not be more than 10-PSIG flowing through this sector at any time.
The 1997 Volvo 850 low pressure port is located on the air conditioning compressor. The low pressure port will be on the right hand side of the compressor.
the pressure would be low
The 2000 Pontiac Bonneville air conditioning compressor low pressure port is located on the bottom of the compressor. You can recharge your cooling system through the low pressure port.
low pressure port is on top of the ac compressor
Some varieties of gas turbine engines (e.g. RR Trent and RB211) have 3 concentric rotating shafts. Each shaft connects a compressor with a turbine. The low pressure compressor, or fan, is driven by the low pressure turbine. The high pressure compressor is driven by the high pressure turbine. Between the low and high pressure compressors there is an intermediate pressure compressor and, guess what... it's driven by the intermediate pressure turbine.
The low pressure port on a 1996 Oldsmobile Cutlass is between the compressor and the firewall. It is on the larger hose attached to the compressor.