If you've got a new switch, all basic settings must be configured using a console cable. SSHing or telnetting to a switch is imposible without an IP address. Therefore you must first configure all the basic settings via console.
If you've got a new switch, all basic settings must be configured using a console cable. SSHing or telnetting to a switch is imposible without an IP address. Therefore you must first configure all the basic settings via console.
If you do not configure a vty pass you will not be able to telnet to the switch
A layer 2 switch may need an IP address if the operator wishes to be able to access it without a serial cable. With an IP address, the switch can be access from anywhere with a connection to the network or an Internet connection.
== ==
VLAN
When you want to configure a switch and/or a router.
When you want to configure a switch and/or a router.
Configure the VTP mode of the switch to transparent. Configure the switch with the same VTP domain name as other switches in the network.
You can configure addresses manually or configure the switch to learn the addresses dynamically. For more detailed information visit the Related Link.
vty 0
you plan to use the virtual switch manager you plan to connect to the switch via telnet you plan to use SNMP on the switch
A LAN connection usually goes through a network connectivity device, such as a hub or switch or a router. If you want to go directly from a PC desktop to a laptop use a cross-over cable to connect the two devices and configure the network settings appropriately.
The Nintendo Switch functions as a hybrid, so it can function as both a home console as well as a handheld. It has a detachable tablet, where you can take it on the go, but can also be connected to a TV like a normal console