When a resistance measurement is taken from both primary leads tied together to both secondary leads also tied together in a transformer, and the resistance obtained is 200 Ohms -- not safe in my book.
In 1600 kva transformer we provide NGR (Neutral grounding resistance)
different measurement of temperature
The dc tests that can be done on a transformer are to measure the resistance of each windings and to measure the insulation resistance between the windings and between each winding and the transformer case.
Output voltage (...of a transformer, for example...) will decrease as it is loaded because of the transformer's internal resistance. As output current increases/load resistance decreases, a larger voltage will be dropped across the internal transformer resistance. This same phenomenon is present in AC and DC systems (such as batteries).
When a resistance measurement is taken from both primary leads tied together to both secondary leads also tied together in a transformer, and the resistance obtained is 200 Ohms -- not safe in my book.
The Measurement For Resistance is Ohm
A resistance furnace runs on electricity so it will be some type of electrical transformer.
Transducer is a device which convert physical signal into electrical signal ( current/voltage/resistance). for linear measurement we can use LVDT (Linear Variable Displacement Transducer/ Linear Variable Differential Transformer). and for rotary measurement we can use RVDT (Rotary Variable Differential Transformer)
A megger would not be suitable for testing insulation resistance of a 13.2-kV transformer, as the transformer's voltage rating is significantly higher than the output voltage from a megger.
In 1600 kva transformer we provide NGR (Neutral grounding resistance)
The dc tests that can be done on a transformer are to measure the resistance of each windings and to measure the insulation resistance between the windings and between each winding and the transformer case.
different measurement of temperature
Control transformer used only for control supply 110,220, 24,12V AC. But Potential transformer used voltage measurement purpose.
An ohm is a unit of measurement! It is a measurement of resistance to electrical current.An ohm is the unit to measure the resistance of electricity between two conductors.
1 volt
Output voltage (...of a transformer, for example...) will decrease as it is loaded because of the transformer's internal resistance. As output current increases/load resistance decreases, a larger voltage will be dropped across the internal transformer resistance. This same phenomenon is present in AC and DC systems (such as batteries).