That is depends on the factor of sag and clearance required. And also on the level of voltage transmission used.
To 'damp' vibrations in the conductors.
it will be implemented soon...planning is in progress
a resistor
A resistor.
The major material used in the construction of transmission lines is aluminum alloy. Steel is also used to reinforce the lines. No insulation is used for overhead transmission lines.
mho rerlay is used in long transmission lines
connection of the ground of all the transmission lines and used as a communication cable between protection devices
That is depends on the factor of sag and clearance required. And also on the level of voltage transmission used.
Stranded aluminium, with a steel core.
To 'damp' vibrations in the conductors.
Transmission lines are thicker than TV cable wires because the transmission lines are used to transmit both low freq and high freq signals. And the losses of the transmission lines depend the resistance of the line which inturn depend upon length and area. As we have to transmitt the signals over long distances the transmission lines are thicker in size.Whereas in TV cable wires the construction is totally different in which transmission of signals is in between two conductors thereby avoiding losses.Therefore there is no necessity for these lines to be made thicker. That is why transmission lines are thicker than TV cable wires.
Copper is a good conductor and is fairly strong. It generally is not used in power transmission lines due to cost - generally aluminimum is used.
You can disconnect the 1996 Jeep transmission lines with a 9/16 open end wrench. Be prepared for transmission fluid to come out of the transmission lines.
it will be implemented soon...planning is in progress
if you are asking about the cooling lines for the transmission that connect to the radiator, its easy. first disconnect the lines from the radiator (2 lines, usually on the bottom opposite the radiator outlet) then disconnect the lines from the transmission. remove the brackets holding them on, then remove.
a resistor