0
Resistors are used in transmission lines primarily for impedance matching and to minimize signal reflections. By dissipating excess energy, they help maintain signal integrity over long distances. Additionally, resistors can be employed in termination circuits to prevent standing waves, which can lead to interference and degradation of the signal. Overall, their use enhances the efficiency and reliability of signal transmission.
What else can I help you with?
What is length of the towers that is used on transmission lines?
That is depends on the factor of sag and clearance required. And also on the level of voltage transmission used.
Why dampers are used at the end of tower in transmission lines?
To 'damp' vibrations in the conductors.
HVDC transmission lines being used in Pakistan?
it will be implemented soon...planning is in progress
The span of transmission line between towers takes the form of?
a resistor
A can be used to reduce the current in a circuit?
A resistor.
What is the major material used in constructing transmission lines?
The major material used in the construction of transmission lines is aluminum alloy. Steel is also used to reinforce the lines. No insulation is used for overhead transmission lines.
What are the relay used in transmission line?
mho rerlay is used in long transmission lines
What is the purpose of ground wires in overhead transmission lines?
connection of the ground of all the transmission lines and used as a communication cable between protection devices
What is length of the towers that is used on transmission lines?
That is depends on the factor of sag and clearance required. And also on the level of voltage transmission used.
Why dampers are used at the end of tower in transmission lines?
To 'damp' vibrations in the conductors.
What types of wire are used in transmission lines?
Stranded aluminium, with a steel core.
Why transmission lines are thicker than TV cable wires?
Transmission lines are thicker than TV cable wires because the transmission lines are used to transmit both low freq and high freq signals. And the losses of the transmission lines depend the resistance of the line which inturn depend upon length and area. As we have to transmitt the signals over long distances the transmission lines are thicker in size.Whereas in TV cable wires the construction is totally different in which transmission of signals is in between two conductors thereby avoiding losses.Therefore there is no necessity for these lines to be made thicker. That is why transmission lines are thicker than TV cable wires.
Why copper is used in electrical transmission line?
Copper is a good conductor and is fairly strong. It generally is not used in power transmission lines due to cost - generally aluminimum is used.
Disconnecting transmission lines 96 jeep?
You can disconnect the 1996 Jeep transmission lines with a 9/16 open end wrench. Be prepared for transmission fluid to come out of the transmission lines.
HVDC transmission lines being used in Pakistan?
it will be implemented soon...planning is in progress
The span of transmission line between towers takes the form of?
a resistor
What are power lines used for?
Answer youtubeAnswerThere are two categories of 'power lines': 'transmission lines' and 'distribution lines'. Transmission lines comprise lines supported by transmission towers ('pylons') and distribution lines comprise lines supported by poles. In both cases, their function is to transport electrical energy from the generating stations to the consumer. Transmission lines are normally part of the grid system, a network which links many generating stations and load centres (usually located near large towns, for example); distribution lines link these load centres to consumers -factories, commercial buildings, residences.
