Because clinical thermometer have a very small range. (20 to 45 degrees Celsius at most) and if placed in boiling water, the water being 100 degrees will cause damage to the thermometer.
Boiling water can damage the sensitive parts of a clinical thermometer, affecting its accuracy. It is recommended to clean it using a disinfectant solution or alcohol swab instead of subjecting it to high temperatures.
The thermometer may get damaged if you wash it with hot boiling water.
Also thermometer which is washed in boiling water would give wrong reading as the thermometer already taken up some heat from water..
A clinical thermometer is used to measure body temperature. The average body temperature is about 37*C, or 98.6*F, so the thermometer is calibrated to measure +/- 5*C in either direction.
Boiling water is 100*C which is way above the maximum range of the clinical thermometer, so this high temperature would most likely damage it.
Because most thermometers would break if they were exposed to water hot enough to sterilize them. And sterilization does not occur at warm temperatures.
Type your answer here... because the temperature of celsius is 0 degree to 100 degree whereas the temperature of fahrenheit is 32 degrees to 212 degree
A clinical thermometer can only measure human body temperatures since it can measure no less than 35 degrees celcius and no more than 42 degrees celcius. An ordinary thermometer can measure and object or substance at any temperature. A clinical thermometer can only measure human body temperatures since it can measure no less than 35 degrees celcius and no more than 42 degrees celcius. An ordinary thermometer can measure and object or substance at any temperature.
No, a clinical thermometer should not be dried up after washing it. It should be gently wiped dry with a soft cloth to remove any moisture and then air-dried in a clean, dry place before being stored. It's important to avoid using high heat or rough materials that could damage the thermometer.
A smaller volume allows the thermometer to respond quicker to temperature changes due to less material to heat up or cool down. This ensures faster and more accurate temperature readings in clinical settings where quick and precise measurements are important.
A thermometer can be calibrated by placing it in a temperature-controlled environment, such as an ice bath or boiling water, and adjusting the reading to match the known temperature. This process ensures the accuracy of the thermometer readings and allows for corrections to be made if there are any discrepancies. Calibration should be done regularly to maintain the reliability of the thermometer.
Before using a clinical thermometer, make sure it is clean and disinfected. Shake it down to below 35°C before using. Place it under the tongue for the recommended amount of time (usually about 3 minutes) without biting down to obtain an accurate reading.
A clinical thermometer can only measure human body temperatures since it can measure no less than 35 degrees celcius and no more than 42 degrees celcius. An ordinary thermometer can measure and object or substance at any temperature. A clinical thermometer can only measure human body temperatures since it can measure no less than 35 degrees celcius and no more than 42 degrees celcius. An ordinary thermometer can measure and object or substance at any temperature.
No, a clinical thermometer should not be dried up after washing it. It should be gently wiped dry with a soft cloth to remove any moisture and then air-dried in a clean, dry place before being stored. It's important to avoid using high heat or rough materials that could damage the thermometer.
Before using a clinical thermometer, make sure it is clean and disinfected. Shake it down to below 35°C before using. Place it under the tongue for the recommended amount of time (usually about 3 minutes) without biting down to obtain an accurate reading.
A mercury-in-glass thermometer contains toxic mercury that can harm the environment and human health if not disposed of properly. Mercury can contaminate water sources and soil, so it should be treated as hazardous waste and taken to a designated collection facility for safe disposal. Accidental breakage can release mercury vapors, which are poisonous when inhaled, making careful handling important to prevent exposure.
A good thermometer for measuring the temperature of boiling water is one that is calibrated so that 100oC is in the mid to upper range of the scale. A typical alcohol thermometer usually works nicely.
handpiece should be sterilize after using on each patient.
"You should sterilize them by submerging them in a pot of boiling water for at least five minutes. Then allow them to dry on a clean towel. After that, a good cleaning in hot, soapy water, or a cycle through the dishwasher is sufficient. One caveat: If you have well water, repeated sterilization of the bottles may be best."
A thermometer that can read up to about 110 °C and down to about 60 °C should cover all boiling points of water that you are likely to encounter in a laboratory. Realistically, you probably wouldn't need any wider range than 80 °C to 105 °C.
Place it in boiling water and it should read around 212ºF. Also, if you have a deep fryer, or crock pot, you can set the temperature, and use oil and heat it to 350ºF and test it that way also.
To check if a thermometer works properly, you can place it in ice water and it should read 0 degrees Celsius (32 degrees Fahrenheit). Alternatively, you can place it in boiling water and it should read 100 degrees Celsius (212 degrees Fahrenheit) at sea level. If the thermometer readings are within the expected ranges, it is likely working properly.
If the clinical thermometer is a mercury based thermometer, it needs to be shaken down prior to each use. This is because there is a pinch point between the mercury reservoir bulb and the capillary tube, to ensure that the mercury does not shrink back into the bulb after the temperature has been taken. The mercury has therefore to be shaken back into the bulb before another measurement can be made. One should note that in many countries use of mercury based clinical thermometers is now discouraged (because mercury is toxic) and electronic thermometers are used in stead - these do not need shaking.
A clinical thermometer has the following main features. It has a capillary tube that contains mercury or colored alcohol. A bulb that one places onto a surface to measure the temperature of the body is the other part.