Want this question answered?
according to me anode should be oxidizing electrode as oxidation reaction takes place on anode
earth electrode should be at least 1.5 meter away from building surface...
A vent is non insulated and should be boxed in on the outside of your home. B vent is insulated and can be left exposed,
The electrode must be carefully rinsed.
Heat-resistant, high-temperature materials.
according to me anode should be oxidizing electrode as oxidation reaction takes place on anode
earth electrode should be at least 1.5 meter away from building surface...
Yes, it should
A rule of thumb is - the arc length should be the same as the diameter of the electrode. 3/32" electrode = 3/32" arc length. 1/8" electrode = 1/8" arc length etc. The thicker the electrode coating the shorter the distance from the end of the electrode to the work. Drag rods are contact rods. E-7024 is one.
A vent is non insulated and should be boxed in on the outside of your home. B vent is insulated and can be left exposed,
CBI should be insulated from influence of the government as it helps them to be better able to complete their jobs. Care must be taken to prevent them from exceeding their legal boundaries however.
you should add flygon,wailord,ninjask,gardivor,electrode
Cathode, or negative terminal of power supply
The electrode must be carefully rinsed.
You can find key holders at any store. For a cheap option you should check out the dollar store. It you want something easier you should check Wal mart
Before buying electrical wall heater you must know about your electrical supply, connections and wiring. The wiring should be able to bear additional high current and supply should have capacity for extra wattage. The walls and contacts should be properly insulated and free from moisture. There should be tripping safety mechanism in wall heater.
A pretty good kind cuz mama always told me that I should try my hardest.