answersLogoWhite

0


Want this question answered?

Be notified when an answer is posted

Add your answer:

Earn +20 pts
Q: Why should hoist breakes be off when in use?
Write your answer...
Submit
Still have questions?
magnify glass
imp
Continue Learning about Engineering

Hoist by your own petard?

The petard was the first 'shaped' explosive charge, used by a Mining Engineer (colloquially 'sapper') to precisely direct a blast onto a single point, like a lock or door hinge, when mining toward a defended structure during a siege. It was shaped like a squat cone and because of this shape, concentrated a small charge so well that the sound of the blast rarely carried through the door to the defender. This enabled the sapper to use such a small charge that he could remain quite close to the spot. So close, in fact, that it was conceivable that a sapper might be 'hoist by his own petard' if he was a bit of a show-off. First printed reference was in Shakespeare's 'Hamlet' III.iv.207 "For tis the sport to haue the enginer Hoist with his owne petar"


Can galvanized pipe be used for natural gas?

You should use black pipe -- Galv. pipe will flake off inside of pipe


How do you conduct safety inspection of an overhead traveling crane?

First thing to do is a visual check, looking for obvious damage, - anything loose,broken Check the crane status lights, green,red,yellow, green is operational check bridge lights, all working? check floor for any obvious leaks check ladder for damage prior to climbing into cab, when egressing use 3 point contact, use rungs and not siderails, place ladder at the correct angle, ensure no knots in the rope enter cab and sound horn or other warning device, this will warn others the crane is about to be powered up, wait 30-45 seconds before powering up crane. while you are waiting, check a/c fire extinguisher, radio and any other accessories adjust seat and mirrors for comfort and visibility power up crane check hoist, check up first, if the hoist goes down, stop immediately and get crane checked by maintence. In a safe area, away from traffic ,lower hoist and observe cable, check for obviouse damage, kinking,birds nesting,broken strands, lowering should be smooth. raise hoist to upper limit, ensure limit works, lower hoist 4 inches, get a visual reference point then this becomes stopping position, do not rely on the limit switch to stop the hoist on day to day activities. check trolley left and right, should be smooth, if equiped with a drag brake, no more than 18 inches travel before trolley stops. In a safe area, check bridge travel foreward then reverse, smooth no dogtracking or crabbing. check brakes, should stop crane smoothly. check any other attachments. check air and hydraulics if equipped fill out crane log, a record that the up limit switch is working and in good repair must be written in the logbook


When should I use a screw extractor?

Absolutely you can use a screw extractor to help you remove a screw that has broken off below the surface and you have no alternative to remove them. Here is a website that walks you through the process. http://www.wikihow.com/Use-a-Screw-Extractor


What products use Light Dependent Resistors?

security lights use resistors as the light out side falls the security light turns on and as it gets lighterbout side the light dimms and turns off, in bmw's the resistors are used to detect when the lights should come on as light gets brighter the car lights turn off.

Related questions

Why should I use Hoist Fitness?

Hoist Fitness specializes in gym and home Fitness equipment. I have read nothing but good reviews about them like this www.facebook.com/hoistFitness or this www.world-anaesthesia.org/.../hoist-Fitness-gear-honing-hamstrings-.


How long does a person usually use a ps3?

for about two years then it breakes


How can you pull out your motor without an motor hoist?

Get a Russian guy to help you lift it out. Just kidding, but you should use an engine hoist. Maybe a forklift, tractor, or bobcat but its best to use a hoist because its important to go very slow and you have to pull the engine forward first, then up.


How does a doctor diagnose different types of breakes?

with an x ray maybe you should use google instead of asking 1000 questions


Use hoist and attack in a sentence?

They Had To Hoist The American Flag Up To The Top.


Use hoist in a sentence?

you need to hoist your grades higher or you will be moved to a lower class


When you hoist the flag on heroes day you use a simple machine called?

A flag hoister


Hoist with his own petard?

Hoist with your own petard - means injured by the device you intended to use injure others


What did Mesopotamia people use pulleys for?

to hoist water.


What is the use of the intensifier module on the intake hoist system?

pressure


How do you use hoist in a sentence?

The workers hoisted the heavy load with a crane.


What do the terms hoist and fly mean when describing a flag?

Hoist and fly refer to the measurements of a flag. The hoist of a flag is the measurement of the side which is affixed to the halyard (rope). The fly of the flag is the measurement of the flag when extended perpendicular to the mast (flagpole). You could use the terms length and width, but hoist and fly are more descriptive and accurate.