You may easily break or crush the slide.
beczause you can get fats from carbohydrates -leira custodio
beczause you can get fats from carbohydrates -leira custodio
Yes, but only to do the most basic focusing. Keep in mind that you can break your slide if you move too close with the coarse adjustment knob and any focusing close to the slide should be done with the fine adjustment knobs. (taught HS Chemistry). Hope that helps!
Because you are at the highest magnification, only turn the fine adjustment knob when you are using the high-powered objective lens, and not the coarse adjustment. Otherwise you risk getting your sample out of focus, and you will probably only be able to refocusby starting with the lowest power objective lens.
On a the microscope I use, the ocular (eyepiece) has a magnification power of 10x. The 'low' (or 'scanning') objective lens is 4x, the 'medium' has a power of 10x, and the 'high' has a power of 40x. Multiply the ocular by the lens you're using to get your 'total magnification.' TIP: Only use the coarse adjustment knob while on 'low' power, then use the fine adjustment. Why? If you use the coarse adjustment knob on 'medium' or 'high,' there's a good chance you'll crack your slide. -BugCrunch
You may easily break or crush the slide.
Why should the fine adjustment knob be used only with the HPO
Why should the fine adjustment knob be used only with the HPO
Why should the fine adjustment knob be used only with the HPO
beczause you can get fats from carbohydrates -leira custodio
beczause you can get fats from carbohydrates -leira custodio
beczause you can get fats from carbohydrates -leira custodio
beczause you can get fats from carbohydrates -leira custodio
Course Focus Knob- low Fine Focus Knob- high -MC
The fine adjustment, the two little knobs on both sides of a compound microscope, is rotated to move the body tube down or the stage up in tiny distances to help you focus in HIGH power.The fine focus knob is geared with a different ratio than the coarse knob to "fine tune" your focus. It allows for tiny adjustments to the focus setting, rather than larger ones.
You should have already used the Coarse adjustment on 10x so when you switch to 40x, all you need to do is fine adjust it. Plus, you don't want to break it by turning the Coarse up all the way.
Yes, but only to do the most basic focusing. Keep in mind that you can break your slide if you move too close with the coarse adjustment knob and any focusing close to the slide should be done with the fine adjustment knobs. (taught HS Chemistry). Hope that helps!